Diy: How To Replace Distributor

[xfactortype1]

THIS IS HOW TO REPLACE YOU DISTRIBUTOR INCASE YOU INNER SEAL IS SHOT, THE BEARING WENT, OR CRANK SENSOR IS SHOT. SIMPLE YET I KNOW WE GET QUESTIONS.

CB7 HOW TO REPLACE THE DISTRIBUTOR

AGAIN AS I WILL MENTION FEEL FREE TO DONATE AS IT WILL ENSURE INFORMATION WILL STAY ON THE WEB.


THANKS X

[JTEK24]

Nice man, I was looking for this earlier. It should be the same for tune up purposes too right?

[ExplodingCake]

I replaced my distributor when my ignitor died and the wires messed up. Real easy to do , did not even have to time it. Just remember the rotor and dizzy position when removed. I got the timing checked to make sure , it was in spec.

Also , if there is oil leaking from the distributor get it checked ASAP especially if the oil is entering the internal section of the distributor , it will make the ignitor crap out. Thus making the car shut off unexpected. Once the ignitor has sharted , when it get's hot it will shut off and will never start.