WHATEVER U DO,,,, U DO IT ON UR OWN RISK.
my door lanch broke. so the door won't open. all the handles worked fine but the lanch did't open. broke off the inside of the door and broke off a little piece of the door and broke off the metalic box where the lanch is. and open the door.
here is another view of that piece of shit.
ok here are the tools. lol more or less. lol
u gona need these parts to start.
door
i have two. one old and one a old(new) lol junk yard one.
there is a pic of the driver's side fender. don't mind that for now.
here is how u start.
1. take off the driver's side fender.
now on the ex this was a pain to take off.
there are 3 #10 bolts on top of the fender.(got to open hood)
then take off the turn signal. u got bolts there too. u gona have to take off two screws that hold the bumer near the wheel. and the screw that holds the bumber cover(screw is plastic so be careful wit it,, i broke mine.)
after u do this take off the bolt that is on the bottom of the fender next to the door. the bolt is covered by the side scirts so u got to work u way around it with a screw driver.
then take off the two things that go from the turn signal base to the fender.
then u got to take off the black thing that is located near the wheel. this is where the two screws go to hold the bumer stright. across from the wheel.
u gona need a vicecrean to get a grip to this bolt because the screw driver won't open it.
here is how it looks
take the fender off. now u got to play with it a little bit so it can clear everything that holds it.
2. take the door off.
u got 4 #12 bolts that hold the door to the car. be careful while u take them off. someone has to hold the door. THE DOOR IS VERY HEAVY. so be carful.
BE CAREFUL.
u got about 27 wires hanging. DO NOT CUT THEM.
well i did because i didn't know shit that there were plugs already in the door.
here are the wires that come from the car
THIS IS FOR THE ONE WHO CUT THE WIRES
there are two grups of wires.
1. group is with 12 wires. there are two wires that have the same colour. blue with a green line or the other way around. just conect them with the corresponding wiires and u good to go..
2. and another group with 15 wires.
my door lanch broke. so the door won't open. all the handles worked fine but the lanch did't open. broke off the inside of the door and broke off a little piece of the door and broke off the metalic box where the lanch is. and open the door.
here is another view of that piece of shit.
ok here are the tools. lol more or less. lol
u gona need these parts to start.
door
i have two. one old and one a old(new) lol junk yard one.
there is a pic of the driver's side fender. don't mind that for now.
here is how u start.
1. take off the driver's side fender.
now on the ex this was a pain to take off.
there are 3 #10 bolts on top of the fender.(got to open hood)
then take off the turn signal. u got bolts there too. u gona have to take off two screws that hold the bumer near the wheel. and the screw that holds the bumber cover(screw is plastic so be careful wit it,, i broke mine.)
after u do this take off the bolt that is on the bottom of the fender next to the door. the bolt is covered by the side scirts so u got to work u way around it with a screw driver.
then take off the two things that go from the turn signal base to the fender.
then u got to take off the black thing that is located near the wheel. this is where the two screws go to hold the bumer stright. across from the wheel.
u gona need a vicecrean to get a grip to this bolt because the screw driver won't open it.
here is how it looks
take the fender off. now u got to play with it a little bit so it can clear everything that holds it.
2. take the door off.
u got 4 #12 bolts that hold the door to the car. be careful while u take them off. someone has to hold the door. THE DOOR IS VERY HEAVY. so be carful.
BE CAREFUL.
u got about 27 wires hanging. DO NOT CUT THEM.
well i did because i didn't know shit that there were plugs already in the door.
here are the wires that come from the car
THIS IS FOR THE ONE WHO CUT THE WIRES
there are two grups of wires.
1. group is with 12 wires. there are two wires that have the same colour. blue with a green line or the other way around. just conect them with the corresponding wiires and u good to go..
2. and another group with 15 wires.
Comment