yes ^ got it correct. the '25T' is stamped on the bracket itself. you can try and run the 28T or another bracket. i just found that the 25T lined up the best when the rotor was installed.
Announcement
Collapse
No announcement yet.
SUSP: Front 5-lug Conversion
Collapse
X
-
Hey Tim,
Did you have trouble with the rear spindles on your car? I read on Accordinglydone.com that some people have been driving around with half tightened spindle nuts on the rear and I also completely forgot you had written a DYI nearly 3 years back until I came across it again.
I'm definitely using this write up when I do my 5 lug conversion.
:edit:
Oh and I also heard that 1st gen NSX calipers will bolt right in as well.Henry R
Koni/Neuspeed
1992 Accord LX R.I.P
1993 Accord EX OG since 'o3
Legend FSM
'You see we human beings are not born with prejudices, always they are made for us,
made by someone who wants something' -1943 US War Department video
Comment
-
- i found out that odyssey bearing bolt pattern looks the same as the accord one but they do not line up they are just a little off.
-the odyssey bearing outside diameter is bigger than the accord one, so it will not fit in the accord spindle
-the outside diameter of the hubs are different as well, the prelude one is bigger.
- the only way that this would work would be if you got the prelude hubs machined to fit the accord bearing.
hope this helps people who cant find the odyssey front knuckles and also i had a isuzu van come into my work and it is a odyssey with different badges but they are only in the states i forget what its called but if you look for one of them then you can get the front knuckles
Comment
-
Originally posted by slammed90ex-r- i found out that odyssey bearing bolt pattern looks the same as the accord one but they do not line up they are just a little off.
-the odyssey bearing outside diameter is bigger than the accord one, so it will not fit in the accord spindle
-the outside diameter of the hubs are different as well, the prelude one is bigger.
- the only way that this would work would be if you got the prelude hubs machined to fit the accord bearing.
hope this helps people who cant find the odyssey front knuckles and also i had a isuzu van come into my work and it is a odyssey with different badges but they are only in the states i forget what its called but if you look for one of them then you can get the front knuckles
Majestic Motors or even South Bay Honda
Junkyard (I know for a fact that those vans are a dime a dozen in junkyards).
Or you can even try haprecycling.com (one of the largest Honda recyclers probably in the country or the west coast).
Isuzu Oasis is basically a re badged Odyssey.
Of course you could not use the Accord knuckles hench the reason behind using the Odysseys in the first place.
Why machine parts when everything has already been tested and proven true in the first place?Henry R
Koni/Neuspeed
1992 Accord LX R.I.P
1993 Accord EX OG since 'o3
Legend FSM
'You see we human beings are not born with prejudices, always they are made for us,
made by someone who wants something' -1943 US War Department video
Comment
-
i have only seen one odyssey in all the junk yards i have been to around my area, they are hard to find.
im just saying that odyssey parts will only fit if they are machined, some people were asking a while ago if the odyssey parts would fit the accord parts and i was just explaining that it would only work with machining. not saying that it is worth it
Comment
-
Originally posted by 10thcb7^ Im not tim. But I THINK that the prelude nut tightens enough for it to stake and not fall off how ever if TIM could chime in that would be better.FA1
355
Comment
-
would this be easier???? NOt sure about quality or safeness though.
http://cgi.ebay.com/ebaymotors/RARE-...spagenameZWDVW
Comment
-
Originally posted by 91-accord View Postwould this be easier???? NOt sure about quality or safeness though.
http://cgi.ebay.com/ebaymotors/RARE-...spagenameZWDVWHenry R
Koni/Neuspeed
1992 Accord LX R.I.P
1993 Accord EX OG since 'o3
Legend FSM
'You see we human beings are not born with prejudices, always they are made for us,
made by someone who wants something' -1943 US War Department video
Comment
Comment