F22Chris : 1993 Accord EX

[markrutherford]

I love what you have done! Now you need a basket

[BreckAConner]

My wagon trunk, what's the purpose of the silver thing on the passenger side?

Did you have to cut to fit, I had to cut mine down?

[F22Chris]

Yeah a little off the sides near the seat

[F22Chris]

And another one. Link to Khal's MRT
http://www.cb7tuner.com/vbb/showthread.php?t=206055

[F22Chris]

Replaced the distributor shaft seal, o-ring, and the ICM today.


This thing was brownish red, and leaking.


Nice new seal!

Everything works great now, and I get much better acceleration. After I clean off the grounds and get my voltage back up it won't know how to act.

[Mishakol129]

That's actually not a bad idea, but last time I tried to use my oem bracket with a eBay downpipe, it ended up breaking the bracket on the downpipe and ended up with a huge exhuast leak.

Here is the weld job of that bracket. Even after all that, when I went to use the bracket for the back of the block, that piece snapped in two. So I don't use any bracket now.





I don't think anything is going to break with the setup you got there but if you used the OEM bracket you might run into issues.

[F22Chris]

Those things actually broke the first hard take off I did. I put an a4 header on there and the pen bracket already broke on that one too. I'll weld something up later..

[F22Chris]

LOOK WHAT I DID. Gas was running out so there's some spatter, but it came out well.
I also got two more 24'' pipes to stick on there when I'm feeling like neighbors can suck it. It's not on yet, but soon!



This carburetor gasket has seen some startling things.

[sonikaccord]

MIG??

Hella custom down pipe?

Proceed...

[F22Chris]

MIG??

Hella custom down pipe?

Proceed...

MIG.

Hella custom BLAST PIPES.

Loading...

[aluminum13]

I like the splatter paint in the engine bay. Thing is if someone told me 'I put in splatter paint on select components of my engine' I'd probably think that sounds terrible. But seeing that I can imagine smiling every time I opened the hood.

[F22Chris]

I like the splatter paint in the engine bay. Thing is if someone told me 'I put in splatter paint on select components of my engine' I'd probably think that sounds terrible. But seeing that I can imagine smiling every time I opened the hood.

Thanks man, I appreciate that. I'm thinking about changing it up to a military cargo theme. Like, paint the engine stuff olive drab, then use the block style lettering to write F22 and CB7 or something.

[F22Chris]

Got my blast pipes on. Sound much better than the evo OBX turd. Although it's louder cause straight pipe.

[F22Chris]

Doing my clutch today. I will take pics of the whole thing. Finally no more
Throw out bearing whine and clutch fork squeak!

[Lucien]

I'm liking the blast pipes.