Ok so I figured out that the little box attached to the Acura CL limit switch setup has the relays in it. I was tearing apart a CL at pap looking for relays that were similar to the CB Accord ones below. I didn’t know yet that I already had them lol.
Here is the CL relay box. It mounts up on the back of the moonroof assembly tray.
Here is the limit switch and relay all plugged in and mounted on the back of the CB tray.
The wires here are to be piggy backed into the gray CB moonroof plug in the first pic. I will build a piggy back T harness the taps the green wire to the cars under hood moonroof fuse. One of the blue wires will tap to the under dash fuse wire. The other two smaller wires go up to the switch. The second blue goes to the door on the CL for some reason.
Here is the CL relay box. It mounts up on the back of the moonroof assembly tray.
Here is the limit switch and relay all plugged in and mounted on the back of the CB tray.
The wires here are to be piggy backed into the gray CB moonroof plug in the first pic. I will build a piggy back T harness the taps the green wire to the cars under hood moonroof fuse. One of the blue wires will tap to the under dash fuse wire. The other two smaller wires go up to the switch. The second blue goes to the door on the CL for some reason.
Comment