|
|
|
|
12-09-2009, 11:51 AM
|
#1 |
|
The Solution
Join Date: Nov 2009
Location: Grand Rapids, MI
Posts: 2,184
|
The Official Nitrous Build Thread
If you're running nitrous, post up! This thread is dedicated to all who are spraying, even on stock engines. If you've got an all out N/A build with spray, or just basic bolt-ons, this is for you.
Post your setup, dyno numbers, and 1/4 and 60ft time. Also include a picture of your engine bay, so we can see what you're working with.  Also include a description of the tuning you've done in order to run the spray. Example, timing retardation, spark plugs, ECU tuning, etc. Bottle Fed Motors FTW!  
__________________
R.I.P. Veronica - JDM F20A swapped 2.0 Si wannabe.  Last edited by CB7 Sleeper; 12-09-2009 at 11:56 AM. |
|
|
|
12-09-2009, 03:08 PM
|
#2 |
|
Contributing Member
Join Date: Mar 2005
Location: ThE yAy
Posts: 1,574
|
Mine is H23A1 but in my lude, but anyone with an H23A1 in their cb7 can use it as a reference.
Setup: Engine 2.3L H23A1 Crower Stage 1 Cams NGK Iridium One step colder Plugs NGK Plug Wires Max Bore TB BB6 Type-S Intake DC Header 2.5" Exhaust NOS Wet kit w/ Purge Valve 60 Shot jet P06 ECU Its fully tuned using Neptune RTP Dyno:  
__________________
 '04 SB AP2 211whp 150wtq |
|
|
|
|
12-09-2009, 03:39 PM
|
#3 |
|
CB7tuner Member
Join Date: Apr 2009
Location: Bennington, Nebraska
Posts: 212
|
Stock F20c1 head and block
Stock injectors Stock fuel pump Stock untuned ECU Stock intake with K&N drop-in filter Less than OEM grade tires-Kuhmo Ecsta ASX Invidia test pipe 70 flywheel shot of nitrous- NOS 5120 dry kit Best run at KCIR with a clutch starting to slip was a 13.3@106 with a 2.0 60' Also ran a 13.5@107 and a 13.7@105 Click on the pictures to make them full size    Now I have added a Megan replica header and an AEM EMS standalone ECU. I will be getting an ACT 6 puck clutch and tune myself for a 125whp shot for next season. 
__________________
|
|
|
|
|
12-09-2009, 09:17 PM
|
#4 |
|
Contributing Member
Join Date: Sep 2007
Location: Columbus, OH
Posts: 4,579
|
f22a1
Stock to my knowledge except for: Exospeed stage one cam SRI with a Tsudo mushroom filter Spyder Automotive header, cat, 60 mm stainless exhaust Cold Fusion wet kit, currently set up for a 50 shot Timing retarded one degree 195/60/15 Potenza G009 on the front 163 whp off the bottle Installed it a few months ago. Haven't sprayed her yet.  Off the bottle, she runs 15.87 @ 88.4  
__________________
|
|
|
|
|
12-09-2009, 09:52 PM
|
#5 |
|
The Solution
Join Date: Nov 2009
Location: Grand Rapids, MI
Posts: 2,184
|
awesome guys.
__________________
R.I.P. Veronica - JDM F20A swapped 2.0 Si wannabe. |
|
|
|
|
12-13-2009, 09:12 PM
|
#6 |
|
The Solution
Join Date: Nov 2009
Location: Grand Rapids, MI
Posts: 2,184
|
Bump for more!
__________________
R.I.P. Veronica - JDM F20A swapped 2.0 Si wannabe. |
|
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
