Sup guys. I'm near completion of doing a bb6 cluster swap on my 92 LX 5spdbut I'm having a few issues. First one being I cant seem to get the lights to power on. I have 2 red bb6 to 1 red cb7 and 2 red/black to 1 red/black cb7. Second one is the rpms, I have blue with blue and orange with blue/white... nothing. I think once I get the lights the power maybe the rpms will kick on? Is there something that needs to be plugged in for them to kick on? (Like the turn signals needed the hazard switch plugged in before they can work)
So far what I have wired and working are as follows.
*cel
*parking brake
*door ajar (all doors and dome light)
*srs
*abs
*high beam indicator
*turn signals
*fuel gauge
Things I need to wire are
*low fuel indicator (two wires are same. Dont know how to test, I know one is for shifter in auto.. maybe just wire both in?)
Things wired but dont know if they work/test em
*battery
*oil pressure
I've checked and rechecked and cant seem to find my mistake. Wires look to be in order.
Side note: been back with cb7 for 2 year. Havent post on the site but I check in every time I hit a snag. Always comes through.
So far what I have wired and working are as follows.
*cel
*parking brake
*door ajar (all doors and dome light)
*srs
*abs
*high beam indicator
*turn signals
*fuel gauge
Things I need to wire are
*low fuel indicator (two wires are same. Dont know how to test, I know one is for shifter in auto.. maybe just wire both in?)
Things wired but dont know if they work/test em
*battery
*oil pressure
I've checked and rechecked and cant seem to find my mistake. Wires look to be in order.
Side note: been back with cb7 for 2 year. Havent post on the site but I check in every time I hit a snag. Always comes through.
Comment