Now at 278,000. Brakes have been squeaking and pulsing, so today I did front pads, resurfaced rotors, rear pads and new rotors (inside of rotors were worn oddly). I hate rotor retainer screws. First one I tried to get out, I put the screwdriver in, then rapped it with a hammer to possibly free it up; the tip of screwdriver broke off in the screw! I wound up having to drill all four screws in the front out. After getting a replacement (lifetime warranty) screwdriver, I was able to get the three screws (one missing) in the rear out.
This one will likely be on the market soon. The back seat is not conducive to putting a safety seat in and out, nor is the trunk to putting a stroller in. Probably look for a roughly 2009 vintage CR-V to replace it.
This one will likely be on the market soon. The back seat is not conducive to putting a safety seat in and out, nor is the trunk to putting a stroller in. Probably look for a roughly 2009 vintage CR-V to replace it.
Comment