CB7Tuner Forums

Go Back   CB7Tuner Forums > Site Features > Members' Rides

Reply
 
Thread Tools Rate Thread Display Modes
Old 01-25-2011, 09:37 PM   #1
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
lordoja : 1990 Accord EX

How it came to be:
Back in Nov 10 i decided that the payments for my 09 Lancer GTS were too much to keep up with, that and i no longer needed a sedan... so i gave it up to the bank, however they took it sooner than expected. This was the best CB i could find on the spot since i need a car to get around. Thinking of going over to a 300ZX when it comes down to the engine work so that i wont have to do little by little, just knock it all out at once.

This was the first day after i took her home!




Here are Plans/status
Interior:
FIXED:Replace both door handle assemblies (Wine red)
FIXED:New regulators
Custom Control Panel, in place of stereo (Volt Meter, fog switch, high beam flasher, ECU/TCU code jumper)


Suspension/wheels:
Tokico Illumina 5-way adjustable shocks/struts
Eibach Sportline Springs
Bronze Buddy Club P1QF
FIXED:Brand new Axels


Engine/Fuel:
FIXED: Dizzy O/H
NGK IR Sparks
9.1mm low-resistance sparkplug wires
Mil-Spec Silicone Vaccum lines
Mil-Spec Silicone coolant lines
Custom 2 1/2" Exhaust
Cherry Bomb 8in Galsspack resonator
Apexi N1 muffler
H23 Tranny
H23 TCU
Custom 4ga Ground wires
F22A6 Cam
F22A6 Intake Manifold with double stack
Port Matched head
Knife Edged IM

Shits and giggles:
Red/Clear JDM Tails
Black Housed Headlights
Black Euro corner/city lights
Bumper Running/blinking conversion
OEM 90/91 Fog lights
3000k Highs
3000k HB3 fogs
6000k Lows
1986 300zx(Z31) Hood Props
Hood raised 1/2"
Combination on/blink turning lights
CB9 Trunk storage
A/C Delete

Sun and Sound
Kenwood XR-5S - 5-Channel Amplifier running straight from harness, no deck
Kenwood KFC-1693PS 6.5" 3-way speakers
Pioneer TS-A6964R 6x9 3-way speakers
Hertz HX250.4D 10" sub @ 4+4ohm(2ohm)/450W
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?

Last edited by lordoja; 12-27-2012 at 11:56 PM.
lordoja is offline   Reply With Quote
Old 01-25-2011, 09:38 PM   #2
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Engine Bay

engine bay update shots


3" K&N filter.
A6 IM with double stack painted flat black
changed all vacuum and coolant hoses

Last edited by lordoja; 09-19-2011 at 05:59 PM.
lordoja is offline   Reply With Quote
Old 01-25-2011, 09:39 PM   #3
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Dress/Suspension





black housed head lights and corner lights
3200k highs
6000k lows
amber corners
bumper light running/blinking conversion
installed fogs with 3200k wired to come on with head lights

Last edited by lordoja; 06-28-2011 at 02:07 AM.
lordoja is offline   Reply With Quote
Old 01-25-2011, 09:39 PM   #4
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Interior/Sound

Reserved for interior/sound update shots

Fabed a door lock relay total price ($10)

And Fabed some door locks too (taken from reasonforalarm.com)


Connected Crunch P5000.5 5ch AMP directly to cars speakers, no need for a deck, running with Ipod only

Last edited by lordoja; 04-01-2011 at 05:28 PM.
lordoja is offline   Reply With Quote
Old 01-25-2011, 11:04 PM   #5
Ferocious Cake
CB7tuner Member
 
Join Date: Sep 2010
Location: Vancouver, WA
Posts: 46
Ferocious Cake is cool... so far.
Looks like a pretty clean start, can't wait to see her progress
__________________

Picture courtesy of JezzWolf!
Ferocious Cake is offline   Reply With Quote
Old 01-25-2011, 11:30 PM   #6
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Quote:
Originally Posted by Ferocious Cake View Post
Looks like a pretty clean start, can't wait to see her progress
thx, cant wait to get money to get it started lol, im getting the Hotel double deuce tranny tcu and ecu from gondamanf22 next week and some springs from mistadavieboi to pop on there while i save up for the teins and the bezel from 90accords lol she's gonne have a bit from everyone on here lmao
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?

Last edited by lordoja; 01-26-2011 at 12:56 PM.
lordoja is offline   Reply With Quote
Old 01-26-2011, 12:04 PM   #7
hondamanf22
CB7tuner Member
 
Join Date: Aug 2008
Location: SoCaL to BLUESPRINGS, MO.
Posts: 678
hondamanf22 may have said something they shouldn't have...
Quote:
Originally Posted by lordoja View Post
thx, cant wait to get money to get it started lol, im getting the Hotel double deuce tranny tcu and ecu from hondamanf22 next week and some springs from mistadavieboi to pop on there while i save up for the teins and the beel from 90accors lol she's gonne have a bit from everyone on here lmao

fixed my name lol

good car to start with,clean too. good luck with your build. I've owned my for
10years and just started doing stuff to it myself so it looks like your moving
along nicely.
__________________

Marry Jane
hondamanf22 is offline   Reply With Quote
Old 01-26-2011, 12:57 PM   #8
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Quote:
Originally Posted by hondamanf22 View Post
fixed my name lol

good car to start with,clean too. good luck with your build. I've owned my for
10years and just started doing stuff to it myself so it looks like your moving
along nicely.
i just went over that and WOW it was like 9 kinds of fucked up lmao. thats what happens when you're single and unemployed lmao.

I just fixed some other things i saw wrong with the first post, man i gotta stop posting from my phone... im thinking of getting a F22A JDM engine (saw one at the JY) and re-build it so that i wont have to keep on taking mine out to do small stuff to it and just swap em out, trying to go all-engine on this one
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?

Last edited by lordoja; 01-26-2011 at 01:08 PM.
lordoja is offline   Reply With Quote
Old 01-26-2011, 07:09 PM   #9
kouzie
Contributing Member
 
Join Date: Feb 2007
Location: 10,000 lakes
Posts: 15,414
kouzie is cool... so far.
mmm clean coupe!
__________________

...........AE86-GTS: SOLD.................................................. ........CB7-DX: SOLD
kouzie is offline   Reply With Quote
Old 01-26-2011, 07:15 PM   #10
93SM4_CB7
CB7tuner Member
 
Join Date: Jan 2009
Location: Queens/NYC.
Posts: 1,801
93SM4_CB7 is cool... so far.
Send a message via AIM to 93SM4_CB7
Clean Coupe.

Reminds me of my First CB. Same Color and All , Except mines had a Shit load of Rust
__________________

Check Out My Work In Progess . . . . .
93SM4_CB7 is offline   Reply With Quote
Old 01-26-2011, 08:56 PM   #11
iwork4mycb7
CB7tuner Member
 
Join Date: Oct 2008
Location: los angeles
Posts: 1,623
iwork4mycb7 is cool... so far.
Send a message via AIM to iwork4mycb7 Send a message via Yahoo to iwork4mycb7
clean coupe bro, paint job looks good nice find.
__________________
AT WEST COAST MEET

Quote:
cb7rush: who has the tongs?
Quote:
JDMxDB8: i got a thong on...



to get to see more of my cb click the link below.
http://www.cb7tuner.com/vbb/showthread.php?t=130922
iwork4mycb7 is offline   Reply With Quote
Old 01-27-2011, 08:36 PM   #12
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Quote:
Originally Posted by iwork4mycb7 View Post
clean coupe bro, paint job looks good nice find.
thx

looks good from the front, on the back it has all kinds of cancer =/
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?
lordoja is offline   Reply With Quote
Old 01-31-2011, 06:27 PM   #13
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Im thinking of painting the moldings the same color as the wheels... any input?
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?
lordoja is offline   Reply With Quote
Old 02-02-2011, 01:39 PM   #14
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Update: Got the tranny, Gabe it was in fact an H23 one, also getting the Alt and pulley i got from Snooze amongst other things fixed, my mom's mechanic said he had no idea why there was an F22A1 in my car since it was an EX, luckily he had an A4 laying around from a swap he had done, so he is hooking it up... so needless to say i wont be driving til sometime next week =/
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?
lordoja is offline   Reply With Quote
Old 02-02-2011, 02:33 PM   #15
stretch JDM
Contributing Member
 
Join Date: Mar 2010
Location: Northeast Alabama
Posts: 1,773
stretch JDM seems to have made some friends! stretch JDM seems to have made some friends!
one clean coupe bro . looks like you have got a very good start , good luck with your work and hope all goes well .
__________________

A man that keeps looking back can't see whats in front of him.
stretch JDM is offline   Reply With Quote
Old 02-07-2011, 02:36 AM   #16
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Quote:
Originally Posted by stretch JDM View Post
one clean coupe bro . looks like you have got a very good start , good luck with your work and hope all goes well .
thx

put in the new tranny, and P14, man take off is SWEET! but for some reason the P14 makes it so that when I'm in D4 the sport mode is engaged and on D3 its off. also the TCU was a bitch to put in since it don't fit in the case just right lol.

Thinking of getting the car painted Chrysler Inferno Red... don't know though.
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?
lordoja is offline   Reply With Quote
Old 02-16-2011, 01:33 AM   #17
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Uploaded new valve cover paint shot.
also got an A6 cam waiting to get h23 IM to install it all together
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?
lordoja is offline   Reply With Quote
Old 02-16-2011, 07:53 PM   #18
cb7_07
CB7tuner Member
 
Join Date: Dec 2008
Posts: 226
cb7_07 may have said something they shouldn't have...
awesome work on the valve cover! did you put it into the oven?

looks shiny!
__________________
cb7 rebuild coming soon!
cb7_07 is offline   Reply With Quote
Old 02-16-2011, 11:30 PM   #19
lordoja
Contributing Member
 
Join Date: Jan 2011
Location: San Diego CA
Posts: 701
lordoja is cool... so far.
Quote:
Originally Posted by cb7_07 View Post
awesome work on the valve cover! did you put it into the oven?

looks shiny!
Thx
i thought about it but my POS oven don't work and im too lazy lol.
Just did 6 layers of Rustoleum Classic Gold (light, light, heavy) x2, and 3 of 500 deg Engine Enamel over a period of 3 hours. Not to mention the prep, i <3 airplane paint stripper lol

im also thinking of using the same paint to do my side moldings and trim. still undecided though
__________________
Quote:
Originally Posted by scudweiser View Post
it will go vrooooooom bauggggghhhh mmmmmmaauuugggg. Still no mmmmmbAAAAAAAUUUHHHHHHH though.
Quote:
Originally Posted by deevergote View Post
Do you have anything intelligent to offer, or are you just trying to whore up your post count?
lordoja is offline   Reply With Quote
Old 02-17-2011, 12:30 AM   #20
mr_naler
CB7tuner Member
 
Join Date: Nov 2010
Location: Glencoe, AL
Posts: 207
mr_naler is cool... so far.
Nice start! When I first got my CB I wanted a sedan but got mine fo cheap, but these coupes are growing on me the more I see.
__________________
_C'est La Vie, C'est La Mort_
mr_naler is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:36 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.