SO.CAL Lounge/Postwhore Thread *real lexus pg 356*

[Blk EX Coupe]

http://www.formulad.com/pro-championship/irwindale.html

Anyone going to Formula D on Oct. 8th and 9th?

[jhondayaaj]

Went to my nephews dyno session. Was really kool. He made 352 whp and about 300 ft lb torque. Could have made alot more but we ran out of injectors. He was already using 650cc. And it was only boosting 10 lbs.

[bmxicansd]

Went to my nephews dyno session. Was really kool. He made 352 whp and about 300 ft lb torque. Could have made alot more but we ran out of injectors. He was already using 650cc. And it was only boosting 10 lbs.

[jhondayaaj]

Thanks. He could have made more with 1000cc injectors and max out the turbo at around 500 and some change hp. The tuner said that the motor was good for over 600 hp. But my nephews car should b a good street warrior. Now he needs upgraded axles and slicks and learn how to drive that thing.

[bmxicansd]

Thanks. He could have made more with 1000cc injectors and max out the turbo at around 500 and some change hp. The tuner said that the motor was good for over 600 hp. But my nephews car should b a good street warrior. Now he needs upgraded axles and slicks and learn how to drive that thing.

nice.. what chassis is this beast of a motor in?
1000 cc injectors ftw

[jhondayaaj]

nice.. what chassis is this beast of a motor in?
1000 cc injectors ftw

Ek9. B20 block bored and stroked to 2.2, 95mm crank, je piston, eagle rods, darton sleeves, gsr head ported, not sure what brand valvetrain, STOCK gsr camshaft and cam gear. Tuned on neptunes. No rollcage. Lol. They gonna kick him out if he hook up correctly and hit that 11.99.

[jhondayaaj]

My brothers car should make alot more when he's done. My nephew only ran a precision turbo 60-1 trim. My brothers gonna b running a bigger manifold and turbo with bigger cams, and similar block setup in his lude. Plus he's gonna go full stand alone instead of piggy back. I know the neptunes setup my nephew has is just as hood as a stand alone, but it's still piggying back the ecu.

Plus my nephew only had a 2.5 inch exhaust and his dumb ass left the cat converter on for the tune. Funny, he didn't have enough oil pressure to kick vtec on because the line was too small. We got a bugger line from a hose shop, they installed it and it went from 242 hp no vtec to 352 with vtec. Amazing on what vtec can do.

[bmxicansd]

My brothers car should make alot more when he's done. My nephew only ran a precision turbo 60-1 trim. My brothers gonna b running a bigger manifold and turbo with bigger cams, and similar block setup in his lude. Plus he's gonna go full stand alone instead of piggy back. I know the neptunes setup my nephew has is just as hood as a stand alone, but it's still piggying back the ecu.

Plus my nephew only had a 2.5 inch exhaust and his dumb ass left the cat converter on for the tune. Funny, he didn't have enough oil pressure to kick vtec on because the line was too small. We got a bugger line from a hose shop, they installed it and it went from 242 hp no vtec to 352 with vtec. Amazing on what vtec can do.

If your brother needs a custom turbo manifold built my friend john at www.jspfab.com can fab one up for you.. He just built a custom 5 exhaust port RX8 one for Mazda Trix, but the best one is a custom S2k turbo setup which made 600+ whp on a stock block haha..



http://www.s2ki.com/forums/index.php...#entry19410692

[crusto2k3]

hey guys, speaking of precision turbo, I know one of the sales reps that work there personally. If ya'll are ever really interesed in getting something from there, let me know. He'll hook it up as best as possible.

[my 9t9d]

http://www.cb7tuner.com/vbb/showthread.php?t=165881

Just throwing it out there again since it's getting closer. my9t9d? You still down?

looking forward to it... i posted on the page let me know.. thanks

[jhondayaaj]

Craig, price range?

Dustin, if he can really hook it up, were looking for at least a gt35 ball bearing. Has to at least a 60-1 trim. The higher the better. Lmk. He has money to play with. Just need to find turbo setup and someone to build our engine. And possibly a intercooler kit. No cheap eBay intercooler either.

Craig, u know anyone? For jerrys bb4.

[crusto2k3]

Craig, price range?

Dustin, if he can really hook it up, were looking for at least a gt35 ball bearing. Has to at least a 60-1 trim. The higher the better. Lmk. He has money to play with. Just need to find turbo setup and someone to build our engine. And possibly a intercooler kit. No cheap eBay intercooler either.

Craig, u know anyone? For jerrys bb4.

Joesue, I'll look into it.

[bmxicansd]

Craig, price range?

Dustin, if he can really hook it up, were looking for at least a gt35 ball bearing. Has to at least a 60-1 trim. The higher the better. Lmk. He has money to play with. Just need to find turbo setup and someone to build our engine. And possibly a intercooler kit. No cheap eBay intercooler either.

Craig, u know anyone? For jerrys bb4.

[jhondayaaj]

Just got a $75 gift card from American Honda for my achievement. I don't know what I did but kept my fix right first time at 100% and I'm 76% trained overall. Those cheap ass can keep the money and raise the warranty labor higher. Lol.

[cb7Xtreme]

Just got a $75 gift card from American Honda for my achievement. I don't know what I did but kept my fix right first time at 100% and I'm 76% trained overall. Those cheap ass can keep the money and raise the warranty labor higher. Lol.

congrats joesue...if you dont want it i can take that gift card from you...