Socal Whats new with your RIDE?

[2.2litrebeater]

I like the look of the outlander
I got a yakima bike rack to go with my new (to me) mountain bike.

I usually take if off when not carrying the bike, afraid of the theft horror stories, and looking trendy

[my 9t9d]

got my rear fog light in today and going to install on sunday>>>


i gots 2 for sale so hit me up....
did an engine and tranny oil change...

got my coilover sleeves non brand just to drop the front...

[GHOST 2.2]

stacking chips.

[jhondayaaj]

Cracked rear lip. And no header yet. Caught about 30 fishes yesterday.

[ikayto]

[jhondayaaj]

lol at you wilson.........

[jhondayaaj]

so cal is dead.............................................. ........



but I'll lite it up, got my bisimoto header. will b installed tomorrow and tuned sometime next week when the fuel pump gets in. should I put the h22 injectors in or the dsm injectors when tuning????

[bmxicansd]

so cal is dead.............................................. ........



but I'll lite it up, got my bisimoto header. will b installed tomorrow and tuned sometime next week when the fuel pump gets in. should I put the h22 injectors in or the dsm injectors when tuning????

Bisitmoto header! =)
On your tune the best route would be to ask your tuner what injectors will net the best results.

[CB7=91]

so cal is dead.............................................. ........



but I'll lite it up, got my bisimoto header. will b installed tomorrow and tuned sometime next week when the fuel pump gets in. should I put the h22 injectors in or the dsm injectors when tuning????

what fuel pump are u using im interested cause im thinking of doing similar setup as yours are u getting tuned on hondata?

[jhondayaaj]

craig, I just asked him and he said to use the h22 for now. and if the injectors run out, then we'll install the dsm.

I'm using a external fuel pump from msd my friend gave me. he used it for his gsr turbo. and I'm not getting tuned on hondata.

[CB7=91]

are you using a 3" intake with h22 plenum and throttle body?

[jhondayaaj]

I don't know the diameter, but it's a iceman intake with an HKS filter. Plus I know my motor is healthy. And I plan on getting the valve springs soon. With over 400k miles, it is a healthy and still torquey engine. The h22 trans compliments it well. I don't recommend the f22 trans if u do the same route. Get a h22 trans at least. Wat are your plans?

[CB7=91]

im thinking some what the same as your or maybe the same as of right now im thinking,
h22 trans lsd maybe, h22 plenum and throttle body with a6 runners, bisi stage 2 cam with springs and retainers, bisi headers, 2.5 exhaust piping still thinking what exhaust to go with it. still trying to read more and see what else i would need getting more information but for now thats what i have. will hondata s300 be good to get tuned on?

[jhondayaaj]

well, if you're gonna spend that much already, talk to bisimoto if they can get you a deal on aem ems stand alone. that's what I'm getting. but money talks, with my experience, the only reason why they hooked it up is because I spent alot with them already. are you in on the group buy for the bisimoto header?

you will need a hi flow fuel rail, adj. fuel pressure regulator, and a high flow fuel pump, and a adj. cam gear for tuning. if you get the camshaft alone, I recommend at least getting the fuel rail and adj. fuel regulator, and at least at that, I can help you street tune it.

[CB7=91]

i see thanks. nope im not in the group buy since it might take a while for the full setup i might just end up buying them a full price right now im just trying to piece things together, researching a bit more so i know what im getting into