Need Help Asap!!!

[motobmx105]

i pulled into a parking lot and my car died and my CEL was on so i tried to fire up the ol' F22 up but it would turn over but no fire!? and i looked at my volt gauge and wasnt even reading anything and neither was my digital tach!!? the battery isnt dead cuz my sterio was working fine and the brand new starter was working perfect like it would with a fully charged battery??!! can someone help me please!!!! and yes i have gas lol

[Leung]

hows the weather there?

just turn your key two notches but don't start the engine, listen carefully to see if you can hear your fuel pump clicking. report back.

[motobmx105]

the weather is beautiful lol but yeah that was one of the first things i thought of was mabey the fuel pump but im pretty sure it was working i cant exactly remember. but i will let you know in a couple hours.

[ExplodingCake]

Main relay or igniter.

Check your cel , mostly it will say "Ignition Output Signal".

[motobmx105]

main relay? wheres that located at? and the igniter is in the dizzy right?

[ExplodingCake]

main relay? wheres that located at? and the igniter is in the dizzy right?

Main relay is located under the driver side dash right above the cruise control box. Igniter is in the dizzy.

[motobmx105]

okay ill check it out anything else you guys could think of? thanks alot guys

[spaded93]

I'm having the same problem I Cleaned out the inside of my dizzy, put a new Ignition Coil and checked my main relay... it's starting to piss me off... i need my car damnit lol

[motobmx105]

yeah i know how it feels lol when i got my car from my mom 2 years ago she couldnt get it running and it was starting to go to shit just sitting in her drive way so i talked her into giving it to me, so i me and my dad towed it home and i put a new dizzy in it and it fired right up!! so i basicly got a very clean CB for about 200 bucks lol

[spaded93]

yea, im replacing my dizzy either tonight or tommorow

[Kamikaze_ITR]

Main relay or igniter.

Check your cel , mostly it will say "Ignition Output Signal".

i just had the same problem last week, it was the relay.

[motobmx105]

thanks alot guys but i figured it out! it was my stupid falt, i ran my volt and tach power wire to my ecu fuse down in the fuse block on the drivers side and yeah i blew the fuse it was only temperary but i forgot about it, but its fixed and i ran the wires the right way. thanks guys!