delete power steering

[Hondaman1984]

OK guys i need some help. I am going to remove my ps pump and i would just like to know what should i do with the lines going to the tran and the ps pump? There is 2 lines that go to the speed senser and then 1 goes to the top of the ps pump. Then there is 1 that goes from the bottom of the ps pump to the ps tank. PLease help

[Jonas]

loop the hydraulic lines, or swap in a manual rack. or you are going to dry out your rack and ruin it.

[bobbycos]

my question is why

[Jonas]

it gives madddd power yo!

i dont have power steering but thats just because my belt was too tight and i cut it. its all still hooked up. i just need to put the belt back on.

[KeeleDesign]

read this thread and go to the link i posted on page 4

http://www.cb7tuner.com/vbb/showthread.php?t=36553

[chessboxer]

my question is why

Though I am not known for going for aesthetics over function, it frees up a good amount of space in the engine bay and makes it look much better. Also, with him being turbo, it opens up more space for routing your charge piping.

When I got my camo car, it didn't have P/S. I hated it at first and started to like it for some odd reason, and then removed it from the red car as well.

For the red car, I capped off the line after I cut it and filled the line with p/s fluid prior to capping it off.

[Hondaman1984]

Thanks

Though I am not known for going for aesthetics over function, it frees up a good amount of space in the engine bay and makes it look much better. Also, with him being turbo, it opens up more space for routing your charge piping.

When I got my camo car, it didn't have P/S. I hated it at first and started to like it for some odd reason, and then removed it from the red car as well.

For the red car, I capped off the line after I cut it and filled the line with p/s fluid prior to capping it off.

Thanks to KeeleDesign and chessboxer.

[wed3k]

or if you go with a h22 fluidampr, it doesnt give the pulley for the powersteering so one is forced to delete it.

[Jonas]

i want to get an electric ps pump for my car. i have something going in place of the ps pump where it is now.

[bobbycos]

Though I am not known for going for aesthetics over function, it frees up a good amount of space in the engine bay and makes it look much better. Also, with him being turbo, it opens up more space for routing your charge piping.

When I got my camo car, it didn't have P/S. I hated it at first and started to like it for some odd reason, and then removed it from the red car as well.

For the red car, I capped off the line after I cut it and filled the line with p/s fluid prior to capping it off.

thank you for the answer

[blackedout]

kind of old and dont mean to thread jack but i couldn't help but notice four lines coming off of the steering rack.
A: From pump: 14 mm wrench
B: To oil cooler: 12 mm wrench
C: To reservoir: 17 mm wrench
D: To power steering speed sensor: 12 mm wrench

so what exactly are you supposed to do with all of them and which ones are you supposed to loop?
I had the right picture on here but the url keeps swapping so i am not able to post it and have it stay the sam picture.