help cant get tranny off

[accordhonda9192]

help i cant seem to get my f22a1 tranny off ive took out evert bolt i could find and jump on it everything i can think of its like its welded or something im swapin from a f22a1 to a a4 alil more horse and a bad clutch so i want my old clutch plate helpp

[The G-Man]

Even when you think you got every bolt, there is usually one more that you missed.

Have you tryed prying it apart with a large screwdriver?

[doylna]

seems like a question for a sexual deviant forum?

[Luna92]

seems like a question for a sexual deviant forum?

huh?

[Luna92]

just check for all the botls and if not get the biggest bar you got, like the G-man said. good luck and lets know how that turned out.......oh yea and if its a most torch mother f*****!!!!!!! but should be the last resort

[myk]

seems like a question for a sexual deviant forum?

LOL hahaha, oh boy I wonder if anyone else gets that one.

Seriously though it doesnt just fall off after taking the bolts out, you gotta pry it, get a screw driver in the crack and just start yanking all the way around. It'll eventually come off.

[Luna92]

[QUOTE=myk;1944053]LOL hahaha, oh boy I wonder if anyone else gets that one.
oh now i get it.....ha ha very funny!!!!!!!!!!!!!! OK IT WAS FUNNY!!!!!!!!!

[accordhonda9192]

hey man my neon tranny fell i didnt have to do nothing
im on my way to my mother inlaws place now to try to brake it apart with tire iron

[Luna92]

hey man my neon tranny fell i didnt have to do nothing
im on my way to my mother inlaws place now to try to brake it apart with tire iron

WELL THE FIRST PROBLEM WAS THAT YOUR DRIVING A NEON!!!!! JK!!!!! JUST GIVING YOU A HARD TIME.

[accordhonda9192]

k i got the tranny off but now the axle nut on my other car broke 3 braker bars my 1/2 inch rachet

[chickoomaster]

silly rabbit, those are too tiny. grab a 3/4" breaker bar and a lenght of pipe like a fence post or something. That or Impact gun

[lucid]

Put the car in 5th gear and have someone hold the brake when and if you go for the bigger bar. And another person putting weight over the tire if it spins.
A strong Air compressor powered impact works wonders on those stuck axle nuts...which I don't have personally, so if the car still drives, what I do is go to any auto mechanic or tire place and they will let you use their impact (bring your 1/2" drive socket), for cheap or free. Then put it back on tight enough to where you can drive it safely, but still get it back off at your garage. They get stuck on there after so many miles.


By the way, I know you got the trans off already, but FYI, sometimes you can pop it off by hooking the clutch system up and pushing the pedal to lever via the release fork.

[Accrdwgnguy]

The easiest way to remove the axle nuts is to do it with the wheel on the car and not jacked up. That way the wheel can't spin.

[accordhonda9192]

impact wont work either tried 350 foot pound nothing man it sucks

[4GAccordH22]

You have to "unstake" the axle nut first. There is a dent in the lip of the nut that holds it in place. Pry out the dent if you can and use an impact gun.