Flex pipe question

[markrutherford]

How large is the outlet size on a stock flexpipe. Im about to get some headers with a flex pipe but there is different size from 1.75-2.50. I have a 92 Honda Accord LX 4door and the piping is stock

[cb7_with_snail]

well while your at it get a muffler and do a whole system. youll save money in the long run. but your right its 1.75

[stretch JDM]

a 2.25 will be great man, get the whole set up done that way. it will be a nice upgrade to your ride.

[markrutherford]

well while your at it get a muffler and do a whole system. youll save money in the long run. but your right its 1.75

Are you sure its 1.75? I looked on another site and it says 2.0 and i already have a sweet muffler. This is just temp becasue i have a bad leak in my flex pipe. I plan on doing a 2.25 full exhaust later on after i fix afew things

[old honda tek]

dont waste your money on a cheap header, your better off with a exhaust manifold and flex pipe off a f22a4

[JaberCB7]

you could also find a whole exhaust system for pretty cheap on ebay. its a good start if u just want something quick, i have a set but i got mine due to having a bad exhaust leak when i first got the car...most muffler shops were charging me $700 for new stock exhaust so i decided to get a nice $200 ebay exhaust and slapped it on myself....by the way what part of CT you at? im in new haven

[markrutherford]

you could also find a whole exhaust system for pretty cheap on ebay. its a good start if u just want something quick, i have a set but i got mine due to having a bad exhaust leak when i first got the car...most muffler shops were charging me $700 for new stock exhaust so i decided to get a nice $200 ebay exhaust and slapped it on myself....by the way what part of CT you at? im in new haven

well i only got alittle bit of money so ill just get the cheap ebay headers with flex pipe for 60 bucks or so. But do you know what size i need? And i live in Norwich near the casinos

[cb7_with_snail]

with those 60$ headers. you loose power. the flanges are too small. they offer nothing but a cheap look. now if you get one and have it ported. re-welded for minor leaks. then buy 12 more and repeat. because they will rust faster than than my wife says, wow your already done!?!?!?!? but if you want something that will give you a little bump of hp DO get the oem f22a4 header. plus your not turbo or anything forced induction so a flex pipe on a stock f22a1 will do nothing.

[markrutherford]

with those 60$ headers. you loose power. the flanges are too small. they offer nothing but a cheap look. now if you get one and have it ported. re-welded for minor leaks. then buy 12 more and repeat. because they will rust faster than than my wife says, wow your already done!?!?!?!? but if you want something that will give you a little bump of hp DO get the oem f22a4 header. plus your not turbo or anything forced induction so a flex pipe on a stock f22a1 will do nothing.

I already called the junk yards around here and they dont got any thats why im just gonna get the cheap headers becasue it comes with a flex pipe which i need badly. I just keep getting pulled over for the noise of the flex pipe. So my question is how large is our stock exhaust pipe

[cb7_with_snail]

dont do it but its 1.75