Replacing Clutch help

[deevergote]

Yes, the fitment of an H22 clutch will be exactly the same as an F22 clutch.

[Granite CB7]

^yup, all F22, F23, H23 and H22 clutches + f/w's are interchangeable. For example I am running an F22A6 w/ JDM H22 LSD trans and OE H22 clutch and f/w. H22 and F22 f/w are exactly the same, same part #.

[deevergote]

Many aftermarket clutch kits will say "90-02 Accord and 92-01 Prelude"

[rawb_dbap]

Yes, the fitment of an H22 clutch will be exactly the same as an F22 clutch.

So you guys think I should get an oem exedy clutch for an h22??

[deevergote]

Get what's best for your car.

[rawb_dbap]

Alright guys, i looked up the 2 cluthes and the difference is: Accord Clutch-Disc Outer Diameter 225mm (8-7/8in) & Prelude clutch-Disc Outer Diameter 219mm (8-5/8in), what do you guys think?? & also can i leave my old f/w on?

[deevergote]

You can reuse your old flywheel, but you'll need to get it resurfaced.

[rawb_dbap]

You can reuse your old flywheel, but you'll need to get it resurfaced.

how or where would i do that? lol

[deevergote]

Take it to a shop.

[rawb_dbap]

uhm any rear main crank seal will do fine? or do i need an expensive one?

[deevergote]

Get it from Honda. When it comes to parts that will destroy your engine if they fail, why risk getting something cheaper?

[rawb_dbap]

Get it from Honda. When it comes to parts that will destroy your engine if they fail, why risk getting something cheaper?

very true, i wasn't sure thats why, ima get a flywheel from autozone, 56 bucks. 19 lbs. sounds good?

[deevergote]

It probably won't be bad. Just a stock replacement.

[rawb_dbap]

***So it's been like 4 days and my cars still in the shop :/, my autoshop teacher has been laggin on helpin me lol, anyways, i'm 3 bolts away from the flywheel to drop, they are stripped to the max, any suggestions on how to remove them easily? thanks.