Dc headers missing something?

[kevinjrcb]

Im pretty sure they are supposed to be 4 2 1 headers? Correct me if im wrong

[IMG][/IMG]

[illinois_erik]

obviously.. you need a downpipe.

[Wickit]

You need the 2-1 part, which is the downpipe. a6 and a4 will fit that if its an f22a.

[deevergote]

Purchasing just the upper half is pretty useless. You'll need to find a lower half that will bolt to it properly (I don't believe all flanges are the same.)

Also, since nobody has said it yet... it's just "header", not "headers". Our engines only have one header.

[Quashish]

You need the 2-1 part, which is the downpipe. a6 and a4 will fit that if its an f22a.

I know for sure the a6 stock downpipe will not fit onto the dc sports top manifold. I've tried. That's why right now Im running a hoopty self fabricated downpipe. I'm actually about to put my new complete dc header on to replace my current hoopty downpipe.

[Wickit]

I know for sure the a6 stock downpipe will not fit onto the dc sports top manifold. I've tried. That's why right now Im running a hoopty self fabricated downpipe. I'm actually about to put my new complete dc header on to replace my current hoopty downpipe.

Really? Huh, that's weird because my friend put on the stock a6 (what he said, could have been a4), downpipe onto a dc sports header and it fit perfect? Unless he fabbed it up before hand.

[Quashish]

For me the a6 downpipe was too tall i guess i would say.

[kevinjrcb]

Went to the junkyard to find an a4 down pipe but all of them were cut.