Hey guys, I've been doing this for a while to all my cars. I figured I would share the DIY with you guys. So here it goes....
Supplies:
1 sheet of grip tape from your local skate shop. fuck the chain stores.
1 screw driver
1 razor blade
First, remove the rubber covers on your clutch and brake pedals. It's not hard to do at all.
Take a piece of the grip tape and place it over the pedal.
Take a screwdriver and rub around the edges like so. You want the grip tape to be on the pedals while you're doing this step. I didn't take pics during the process cause I'm lazy. lol.
After you do this all around the pedal, you can peel the excess off.
The finished product will look like this...
You won't slide off the pedals anymore during intense driving or those pesky heal toe down shifts. Hope it helps some of you out.
Supplies:
1 sheet of grip tape from your local skate shop. fuck the chain stores.
1 screw driver
1 razor blade
First, remove the rubber covers on your clutch and brake pedals. It's not hard to do at all.
Take a piece of the grip tape and place it over the pedal.
Take a screwdriver and rub around the edges like so. You want the grip tape to be on the pedals while you're doing this step. I didn't take pics during the process cause I'm lazy. lol.
After you do this all around the pedal, you can peel the excess off.
The finished product will look like this...
You won't slide off the pedals anymore during intense driving or those pesky heal toe down shifts. Hope it helps some of you out.
Comment