I have some Silverstar lights installed for my low beams on my Accord. I'm extremely satisfied with them so far. They are waaayyyy better than the stock lights since they are much brighter. Anyway, take it easy.
Announcement
Collapse
No announcement yet.
The Truth of "JDM Style" and Halogen Projectors
Collapse
This is a sticky topic.
X
X
-
I had the halo projectors on my CD5. The halo was neat for awhile, but the overall performance sucked. I will never get projectors again, unless of course I did a retro fit, but I don't plan on it.RIP:
1993 Honda Accord LX 5spd Sedan [2005-2007]
1994 Honda Accord LX 5spd Sedan [2001-2004]
Currently daily:
1990 Honda Accord EX 5spd Sedan [2012-Present]
Comment
-
so, if i was to go on ebay, purchase these lights, and then go buy a xenon conversion kit, would i be alright? becasue, that is my overall plan, since the JDM ones arent exactly safe. i am not concerned about legality (disclaimer-although i should), but i do actually give a shit about safety. i know how pissed i get at oncoming brights.
i really want to try to do the kind that aww_shiet has on his.
Comment
-
Originally posted by Troggie42so, if i was to go on ebay, purchase these lights, and then go buy a xenon conversion kit, would i be alright? becasue, that is my overall plan, since the JDM ones arent exactly safe. i am not concerned about legality (disclaimer-although i should), but i do actually give a shit about safety. i know how pissed i get at oncoming brights.
i really want to try to do the kind that aww_shiet has on his.Maple50175 - you're annoying =P
Brandoncb7 - I don't mean to come across like an ass but I see why you irritate Aaron now.
JoshM - Crotch rocket = chick magnet.
Comment
-
Light output on the ebay projectors are decent, at least my set puts out equivalent to stock. The center running/parking lights between the low and high beams burned out that came with it, but have been replaced since, the rest of the bulbs are fine. My biggest complaint, would be the crappy non-clipping, cheaply glued connectors. If you want to be trouble free, just replace the connectors from the factory harness, and the ones on the lights, with something better, or just solder the wires together, depends upon how permanant you want it. I plan to retrofit my low and high beams to hid, but I need to confirm what bulbs are currently being used. H3/H4? I'll have to take my bulbs out and check.
Comment
Comment