Announcement

Collapse
No announcement yet.

What plug is this?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What plug is this?

    I'm currently in the middle of doing a heap of rewiring. I'm up to the driver side headlight loom and there is one plug that I can't figure out where it came from. Yeah I should have labelled them all when they came off. I can't find it on any of my wiring diagrams.

    It's a two pin plug with wires: yellow/red and yellow/white. It runs with the headlight loom. On the left side (drivers side in usa). Thanks for any help.
    Last edited by Cam; 06-08-2009, 08:03 AM.
    Members Ride Thread

    #2
    any pics of such plug ??? your wiring might be different so pics would help out alot !


    Originally posted by Devergote
    A CB7 with an H22, a clean paintjob, HIDs with a projector retrofit, some nice wheels, and a mild drop on H&R Sport springs and Koni Yellow shocks... that's the perfect car. I'd be happy with that for the rest of my life.

    Comment


      #3
      If it's near the headlight there's a slight chance it might be the connector for the engine block heater, though I'm not sure - they had a 3 prong outlet plug on the end normally. There's another one that's extra under the dizzy area. I think it's for a sensor of some sort.

      Comment


        #4
        Yeah I'll get a pic after work. It looks similar to the parker light plug but there's no cap over the back. Wires just come straight out. The car is a cb3 that used to be carby so there are shit loads of plugs that weren't used. Had foglight wiring and all sorts of shit that wasn't used. So there is a high chance that it went nowhere. Just don't want to cut it off till I'm sure. thanks fellas.
        Members Ride Thread

        Comment


          #5
          Off the top of my head for memory its probabally the A/C plug, could also be the horn if you forgot that.
          But post a pic first and we'll be able to tell more accurately.

          Always good to help someone from across the ditch on here


          Car Safety / General Servicing Checks --------Basic suspension checks

          My 5.7 LS1 Holden Ute

          A "Finished" project car is never finished until its been sold.

          If at first you don't succeed, Try again. Don't give up too easily, persistance pays off in the end.

          Comment


            #6
            Originally posted by Cam View Post
            I can't find it on any of my wiring diagrams.
            then use mine

            pic would help...I do recall several unused plugs on mine...try the link there...might help you
            ____

            Comment


              #7
              Finally got a pic. Here it is. Thanks bcjammerx thats the diagram I've been using.

              edit: just realised the colours are actually yellow/red and yellow/white



              Last edited by Cam; 06-08-2009, 08:02 AM.
              Members Ride Thread

              Comment

              Working...
              X