So after doing my suspension i noticed about 6 holes in my exhaust. And that was only on the axle back. Now makes sense why my stock exhaust is quite loud. Dont have much money. Hopefully gonna start work soon. So my question is whats a good exhaust, not expensive, and has 2.50 pipping? Second question would be: could the exhaust bolt up to my F22a6 downpipe or do i need to get a new header for it to bolt on to? Thanks in advance for any help.
Announcement
Collapse
Please DO NOT Post In The General Section
From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
See more
See less
Exhaust
Collapse
X
-
exhausts bolt on to your cat, not directly to your header unless you have a shop weld it straight to your header DP.
I would buy a greddy sp2 or apexi world sport 2 universal muffler and get custom piping to it.
cheapest route that i'd go. I wouldnt bother with that e*** crap that sound like angry bees.
-
Yeah, 60mm is 3mm more than 2.25", I knew it was close.
Crush-bent tube is all your exhaust shop will be able to do and will be cheapest, but won't flow the best.
It'll cost more, but if you want a mandrel bent 2.5" system, check out kteller.comThere are no black and white suspension answers!!!!!!!!!!!
Comment
-
Originally posted by mndude07 View PostYeah, 60mm is 3mm more than 2.25", I knew it was close.
Crush-bent tube is all your exhaust shop will be able to do and will be cheapest, but won't flow the best.
It'll cost more, but if you want a mandrel bent 2.5" system, check out kteller.comMembers Ride sold...
I'm back...... with a coupe. oh boy here we go.
Comment
-
Originally posted by bcjammerx View Post2.5 and cheap (under 300) is gonna be hard to find...maybe at a local shopMembers Ride sold...
I'm back...... with a coupe. oh boy here we go.
Comment
-
Go to a local exhaust shop. Get 2.5" piping, buy a couple resonators and your choice of muffler. It would probably be a good idea to replace your cat with a "highflow" one as well.
I built my entire exhaust for under $400 which included 2.5" piping, 13" resonator, OBX twin loop muffler, catco cat. The only things I got from the exhaust shop was the piping and resonator.
CrzyTuning now offering port services
Comment
Comment