msd wire

[xtr91accord]

is a set of msd spark plug wire gunna help me out at all or no?

[RICHIE*GT35R]

it did to me see my pic.....

[xtr91accord]

so it did give u some power gains?

[accrdpower]

if u get the superconductor wires OMG def helps u out...not a huge difference in power gain but def better idle, better accel, better fuel economy. if u go with the basic msd wire....very little difference. hope this helps!

[RICHIE*GT35R]

so it did give u some power gains?

yes but i got MSD coil, wires,cap and rotor. when i use the nitrous... feels much better... i going to get the MSD 6AL in 3 more weeks

[KillerCam282]

yes but i got MSD coil, wires,cap and rotor. when i use the nitrous... feels much better... i going to get the MSD 6AL in 3 more weeks

That also means you are using the MSD 0.8 ohm resistor...Although the Honda stock ignition is high powered, the MSD can free up existing horsepower in the top end. Its a great improvement, plus all the characteistics of the car are smoother.

[RICHIE*GT35R]

That also means you are using the MSD 0.8 ohm resistor...

what resistor

[KillerCam282]

what resistor

I hope your voltage is not jumping all over the place then. MSD makes a Ballast resistor for people who want to run the coil alone. Basically it keeps the voltage in line so your turning signal doesnt just go off, or you brake lights flashing nonstop. (happenned to me before i got it). It is necessary when running coils like the blaster ss, 2 and 3 in our CB's. Unless your car has no electrical problem so far...how long you have been running the coil?

[xtr91accord]

so http://www.prostreetonline.com/buy/m...g_wires/honda/ is what i need and that will help me?

[RICHIE*GT35R]

I hope your voltage is not jumping all over the place then. MSD makes a Ballast resistor for people who want to run the coil alone. Basically it keeps the voltage in line so your turning signal doesnt just go off, or you brake lights flashing nonstop. (happenned to me before i got it). It is necessary when running coils like the blaster ss, 2 and 3 in our CB's. Unless your car has no electrical problem so far...how long you have been running the coil?

it's been in the car for 4 month now.... no prolem found at this time...here the pic...

[xtr91accord]

are the wires for the lx wagon and my lx sedan the same 2.2L? i didnt see one that said 2.2L LX sedan.
take a look
http://www.prostreetonline.com/buy/m...g_wires/honda/

[RICHIE*GT35R]

are the wires for the lx wagon and my lx sedan the same 2.2L? i didnt see one that said 2.2L LX sedan.
take a look
http://www.prostreetonline.com/buy/m...g_wires/honda/

Yo the EX wires will work on your car

[xtr91accord]

i went ahead and ordered the wires for the wagon but i was looking and the part number for that and the ex are all the same so it doesnt matter. i am ordering a ss blaster coil and hi per. distributor cap as well. thanks guys!

[KillerCam282]

Damn, my car really was one of the few cars that got screwed. I ran a Blaster 2 coil and the voltage would do things like make by brake light come on, turning signals, you name it. I installed the resistor and it took a while but everything went back to normal.

[xtr91accord]

hope my car doesnt do that, i am using the SS coil