prelude intake?

[Vtechno]

if it works. its fine. when i multi-ported an ef sedan, i made a kick down cable. i halfassed it cause i was tired, but it worked and is still working today and its been like a year.

[19dabeast85]

So is it the consensus that a 92-96 prelude 3" cold air intake will fit in the 90-93 accords without any modifications except cutting the hole below the battery?

If so I'm getting this to go with my H23 IM swap:
92-96 cold air intake on ebay

[Losiracer2]

So is it the consensus that a 92-96 prelude 3" cold air intake will fit in the 90-93 accords without any modifications except cutting the hole below the battery?

If so I'm getting this to go with my H23 IM swap:
92-96 cold air intake on ebay

yeah that should fit even better, since it has two sections which you can twist and kinda form to fit. Mine was only ONE long pipe, it was difficult to say the least haha, but i managed.

[90Cb7sleeper]

So is it the consensus that a 92-96 prelude 3" cold air intake will fit in the 90-93 accords without any modifications except cutting the hole below the battery?

If so I'm getting this to go with my H23 IM swap:
92-96 cold air intake on ebay

Did you ever purchase this intake? and was it really a 3inch? if so, ill pick one up myself...

[90Cb7sleeper]

http://cgi.ebay.com/ebaymotors/90-93...5591QQtcZphoto

This intake is for 90-93 accords and advertises the 3 inch piping as well

[owequitit]

i think the v2 intake is designed around the "anti reversion" theory like the Hytech headers. its been proven too work.

The V2 is designed around "resonant tuning." Since different diameters and lenghts of pipe resonate at different frequencies (RPM's), AEM basically made to different lengths and diameters of pipe on 1 intake to increase the amount of resonance tuning. They are dyno proven fairly repeatedly to have an increase over a regular straight tube intake, but IMO it is a small gain for the amount of $$.

[eriemoto.]

we would only see positive gains from a 3" intake with an IM upgrade from the stock one (ie h23/a6), correct?

[rossisalvage]

SHITTT. I won this auction right here http://cgi.ebay.com/ebaymotors/ws/eB...m=170187735793 and it came today. Turns out the piping is not even close to 3 inch like it says all over the auction. Its like 2.5-2.75. Did anyone else order one that was actually 3 inch? This guy better send me my money back

[Vtechno]

so what do yall think about the fitment of the V2 for a lude? should i get it for a lude of CD?

[8ball]

SHITTT. I won this auction right here http://cgi.ebay.com/ebaymotors/ws/eB...m=170187735793 and it came today. Turns out the piping is not even close to 3 inch like it says all over the auction. Its like 2.5-2.75. Did anyone else order one that was actually 3 inch? This guy better send me my money back

Actually I was looking for an intake header and exhaust on ebay for the cheapy stuffl appearantly there is a 3inch intake and decent header with 2.5inch cat back for cheap and there are some reviews on the board, ill search and come back soon.

[8ball]

http://cgi.ebay.com/ebaymotors/_Car-...1%7C240%3A1318

http://cgi.ebay.com/ebaymotors/ws/eB...m=170187735793

that shoud be the intake and exhaust that gets the good reviews I THINK. I know for sure the exhaust gets good reviews. And the CAI looks like the 1 if I remember right. I just have to find the EBAY Header that gets good reviews too. 300 bucks for I/H/E w00t

[Vtechno]

i think ive made my decision. im calling Dave (the owner) tomorrow for more info. i might get the black "adapter", the lowermanifold and their throttle body. if so, ill be dynoing before and after. stay tuned.

http://dh-racing.com/h22-top-mount-i...manifold.shtml