I have a burnt component in my chipped p06 manual ecu...please let me know what component is this so I can resolder a new one
-
New paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can -
that thing looks like it really got smoked and got super hot. you may have also damaged some of the solder tracks with that much heat. you may want to just concider replacing the ecu.
My Wiretuck/ Insane engine bay
member ride thread
11.86@120mph T66 turbo 612hp F22A
DIVULGE MOTORSPORTS
People can hate all they want, my f22 is faster than yours.
I have literally been on this site for 10 years, I know what i am talking about!
John 10:18 "No one takes it from me, but I lay it down of my own accord. I have authority to lay it down and authority to take it up again. " -
thanks for the response buuttt the ecu works fine...I already did all the cleaning carb cleaner I had and the clear coating on the ecu took the burning...I un solder the connection myself and the lines were still intack.....I just need to know what component it isNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I canComment
-
anyoneNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I canComment
-
I just repaired a ecu that had slightly worse damage recently. I could probably fix that for you. Let me see if I have the parts to do it.spin cityComment
-
thanks for the help sir...butt..I just need to know what the component is...I don't soldering myselfNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I canComment
-
its hard to tell in the pic and without taking my ecu apart and looking, i'm gonna say it looks like a little transistor. does it have three prongs soldered to the board?
looks like it used to look like this . . .
Last edited by honda_kid; 11-08-2009, 11:55 AM.Comment
-
yeah there are 3 prongs and the number location is r135 I believe..I have more straight edges than the round one...I know does transistors....if you say it looks like a transistor...I have a starting point to lookLast edited by Gtseviper; 11-08-2009, 11:51 AM.New paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I canComment
-
r### is a resistor. i think transistors are q###Comment
-
alright thank you for that note...ok after better looking (it's kinda hard to tell which numbers go with which if they are so close) I"m have to go with Q31 instead because the r135 looks like it closer to that long componentNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I canComment
-
Yeah it's actually q31 with a E next to the whiteout line...thanks or your help sir
r*** resistor
q*** transistor
D***diodeLast edited by Gtseviper; 11-08-2009, 12:17 PM.New paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I canComment
-
Well I found what this component is and what makes it pop
The q31 transistor number is D1780. It usually pops it the purge solenoid and iat sensor connections arent' in the right place
http://honda-tech.com/showthread.php?t=1548825
here is the data sheet for it
http://pdf1.alldatasheet.com/datashe...C/2SD1780.html
reason for why I'm not looking for another
http://www.hondacivicforum.com/forum...ad.php?t=73228Last edited by Gtseviper; 11-08-2009, 01:31 PM.New paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I canComment
-
I must have lost the one I had, I cant find it. You can buy them from xenocron.
http://www.xenocron.com/xenocron-q31...tor-p-335.htmlspin cityComment
Comment