wud up ppl.... i just boosted my h and i was wondering if i have a buy a missing link or is there some other way i can trick my map sensor into thinking that iam not running boost?
-
-
you do NOT want to trick your map sensor into thinking that you are not running boost.
whoever told you to do that is retarded -
Stock map sensor will read up to 11psi.
If you wanted to go over 11psi, you will need to get a 3/4/5 bar map sensor.
Car Safety / General Servicing Checks --------Basic suspension checks
My 5.7 LS1 Holden Ute
A "Finished" project car is never finished until its been sold.
If at first you don't succeed, Try again. Don't give up too easily, persistance pays off in the end.Comment
-
Correct. A 2 bar would work to, up to 15 psi.
Get a 3 bar map sensor and get tuned for it.2010 Taurus SHO - Livernois Goodies
2002 BMW 330 CI Convertible - HUNK OF JUNKComment
-
being that 1 bar is equal to 1 atmospere (14.3 psi) shouldnt that mean that a 2bar should be good for 28.6 psi?Originally posted by chessboxer View Post
My Wiretuck/ Insane engine bay
member ride thread
11.86@120mph T66 turbo 612hp F22A
DIVULGE MOTORSPORTS
People can hate all they want, my f22 is faster than yours.
I have literally been on this site for 10 years, I know what i am talking about!
John 10:18 "No one takes it from me, but I lay it down of my own accord. I have authority to lay it down and authority to take it up again. "Comment
-
One would think, but it in fact does not. When rating map sensors, they also take into account 1 bar of vacuum.
If you ever deal with a map sensor labeled absolute, it will not take into account the 1 bar of vacuum. A 10 bar absolute sensor like we sold at Haltech, was more for measuring fuel and oil pressure, and would read up to about 150 psi. On the contrary, a 2 bar map sensor reads 15 psi (approximate), 3 bar is 30, 5 bar is 60, etc.
It all goes back to the differences in absolute pressure vs gauge pressure.2010 Taurus SHO - Livernois Goodies
2002 BMW 330 CI Convertible - HUNK OF JUNKComment
Comment