Garrett GT 37 ?

[A Zombies Minge]

I can one of these for free, just want to know if I can make it work in my 92 Accord lx before I take it ? I would be trading an old trans. for my Beretta that I no longer have any need for. I know there are many other components I would need including a custom em, but is this an acceptable size turbo for my F22a1 ?

This is the info I have on it: .58 compressor side and max turbine side is .90 this is a stock turbo off of a late model Duramax diesel, it uses variable turbine blades (the blades close at low rpm/idles and open progressively with increased exhaust flow) which means it spools almost instantly.
The turbine housing needs to be pulled off and the vanes need to be cleaned.
It doesnt use a wastegate in stock form as theres no need, however unless you find a way to crossover an electronic boost controller you will need to use a wastegate and connect a manual actuator to open the vanes.

[ChampCoupe]

it will work, but that is a big turbo. if your not planning to make over 600whp. that turbo is over kill. get it and sell it. its a $1300 turbo brand new.

[bustedhonda]

Get it I know someone that might what it.

[bustedhonda]

But yeah it is a big turbo. Alot of people use them on there evo/dsm

[A Zombies Minge]

I am working on getting right now, if I do I won't be looking to get much for it either as the trans I am trading it for was only going to sell for about $300. Sounds to big for my needs, I only to plan to run about 8-10 lbs of boost since I am on a stock engine.

[Cobalt]

8-10 lbs on that turbo is over 20 lbs on a t3t04e.

[dbsharp]

go for it! I know a guy who used a HE351 with the variable turbine on a f22. he said that it spooled up very quick.

[A Zombies Minge]

So I got the turbo, looks good. Has no vertical shaft play at all and almost no horizontal play either. Anybody want it, let me know and I will create private ebay auction.