Cambers Kits????

[lilb_1979]

Most shops are pretty weary about working on lowered cars. They aren't being asses, they just don't want to try and work on a car that can't be fixed to the driver's satisfaction and then get blasted when you realize your tires are really worn down. I've found Firestone to be pretty good about working with lowered cars. Plus, they have a Lifetime Alignment deal where you pay $150 or so and you can get alignments from any Firestone for the life of the vehicle. It's a really good deal.

Hmm ok I will have to check that out!!
Thanks!

[lilb_1979]

Ok I called Firestone and they said them mite be able to do it. They said it varys from vehicles. Just for them to look at it will cost me $20 and to just take the toe out(if they can do it) will cost me $70!! I'll pass on that!! Back to lookin!!

[bcjammerx]

i got my uca's powdercoated with Energy Suspension polyurethene inserts and SPC camber kit. Dont get some cheap shit, buy good shit and you will be happy

YES YES YES

first with the adjustable arms...you will most likely hit your inner fender well...no bueno.

With adjustable ball joints, DO NOT get the ones with snap rings holding them in...while g-man had front upper ball joint replacements from acdelco they were held in by snap rings...which failed...

THESE however should not...I need THOSE!!!

[KeeleDesign]

this is what happened to my car, with a ebay camber kit...

going down the road. it snapped.
this picture is after i pulled in the shop and jacked it up... and this is what my wheel looked like before i started wrenching on anything... it could have been alot worse.

[92cb7accord]

I have the ingalls 3degree kit for the front. mine does hit sometimes when I hit big bumps. Other than that there a great purchase. My tires are lasting me a lot longer and having a full tire contact is also great.

[oneoffaccord]

YES YES YES

first with the adjustable arms...you will most likely hit your inner fender well...no bueno.

With adjustable ball joints, DO NOT get the ones with snap rings holding them in...while g-man had front upper ball joint replacements from acdelco they were held in by snap rings...which failed...

THESE however should not...I need THOSE!!!

spend the money and u will be fine

[bcjammerx]

spend the money and u will be fine

on those you bet I will!

[lilb_1979]

Ok I called Firestone and they said them mite be able to do it. They said it varys from vehicles. Just for them to look at it will cost me $20 and to just take the toe out(if they can do it) will cost me $70!! I'll pass on that!! Back to lookin!!

If there is anyone near Columbia, SC that mite know of a shop please help a fellow CB7 tuner out!! I need to get this done before the Sept. 20th Greensboro meet!!
Thanks in Advance!!!

[GreenMadness]

You have to realize that they dont know what your car is. I delt with the same shit until i just took my car in.

I was told by phone my car couldn't be aligned, so i took my car in anyways... they got it on the rack came back to me and said, "hey there is aftermarket stuff so im gonna charge you more and take my time"... i figured mostly bushshit to get more money but SURE!

So an hour later my car was done for $80... i then ask why one the phone my car couldn't be aligned... he said dumb kids with cars lowered +3'' come in with tires rubbing everything and want him to fix it so he just started telling them he couldn't do it.

Put it in perspective, majority of his traffic is not mild/slightly lowered stock looking accords... but rather riced out ebay droped/cut cars that are truly a nightmare, pain in the ass and a huge liability wrapped into one ugly ass half primered tin can

[lilb_1979]

yeah I can understand that.