5 lug swap question

[CB7xTURBO]

is there a way to use odyssey parts all around?

[JaberCB7]

Why do you want to use odyssey? do you have a parts car available? Honestly dude id say just go with what is known, when i was in process of doing my 5 lug conversion the junk yard told me that the 99 TL knuckles fit but i knew if I ran into a snag id be F@#K!

Here is what i used....

FRONT
* 2001 Accord V6 front knuckle- local junk yard
(bought new rotors, pad and one caliper due to seizing) new autozone

Rear
*prelude hub/bearing assembly - new autozone
*2001 accord rotors (originally bought Type R rotors but they did not fit) - new autozone


spent about $$1,200 with wheels

[bobbycos]

Why do you want to use odyssey? do you have a parts car available? Honestly dude id say just go with what is known, when i was in process of doing my 5 lug conversion the junk yard told me that the 99 TL knuckles fit but i knew if I ran into a snag id be F@#K!

Here is what i used....

FRONT
* 2001 Accord V6 front knuckle- local junk yard
(bought new rotors, pad and one caliper due to seizing) new autozone

Rear
*prelude hub/bearing assembly - new autozone
*2001 accord rotors (originally bought Type R rotors but they did not fit) - new autozone


spent about $$1,200 with wheels

got you beat on price !!!!!!!!!!!!

Front
2002 Acura TL front knuckles with rotors/calipers/pads- $150 total

Rear
stayed drum using Prelude bearings with 2001 CR-V drums- $100

5 lug Motegi Roja 17" wheels off craigslist $300

swapped my tires from my old 17" rims and was done $600 total including the tips to the tire guys and the mechanic who did the front end for me

[Night Wolf]

(originally bought Type R rotors but they did not fit) - new autozone

didnt fit? how come? thats what Im rocking

[CB7xTURBO]

whats the easiest? cuz i hear all this stuff about the prelude fronts or whatever.. i never knew u can use TL parts and accord v6 parts.. whats the knuckle guys sorry for the noob question lol

[Night Wolf]

oddy is easy if you can find it. but the accord is more common. atleast in my area. the lude takes work

[CB7xTURBO]

i found an odyssey.. what year is it again..

[cb007]

*2001 accord rotors (originally bought Type R rotors but they did not fit)

I'm using rear Type R's on mines too!, when I was doing my conversion I got a set of Type R from NAPA and they didn't fit, then I went to O'riley and got a set there and they fit .

[bobbycos]

whats the easiest? cuz i hear all this stuff about the prelude fronts or whatever.. i never knew u can use TL parts and accord v6 parts.. whats the knuckle guys sorry for the noob question lol

check the 5 lug swap threads especially the one by "dab916". that is the thread i followed

knuckle OR spindle-same part different word

[JaberCB7]

got you beat on price !!!!!!!!!!!!

Front
2002 Acura TL front knuckles with rotors/calipers/pads- $150 total

Rear
stayed drum using Prelude bearings with 2001 CR-V drums- $100

5 lug Motegi Roja 17" wheels off craigslist $300

swapped my tires from my old 17" rims and was done $600 total including the tips to the tire guys and the mechanic who did the front end for me

well i got pretty much everything brand new and im including my new koni yellows, think total was more though, about $1400

didnt fit? how come? thats what Im rocking

I'm using rear Type R's on mines too!, when I was doing my conversion I got a set of Type R from NAPA and they didn't fit, then I went to O'riley and got a set there and they fit .

Im not sure why they did not fit but i had to get a special order for the type r rotors but the prelude hubs did not fit, the studs were fine if i turned the rotor around but the hub would not fit into the rotor so i just tried swapping out with the v6 accord and all around.

[tommi]

i found an odyssey.. what year is it again..

RA1 is 95-98 odyssey

i had the same problem with my lude rear hub and itr rear rotor. went v6 route and lost the huge itr rotor to the stock sized accord v6 rotor