urethane source

[19dabeast85]

I'm looking for some 80a urethane....anyone have a good source for it? I've searched google and only came up with a couple good hits.

[preludeman92]

https://www.mcmaster.com

part number 8644K11.

[90Cb7sleeper]

http://www.grainger.com/Grainger/items/5A460

one can did all four of my mounts...

I bought it at the local Grainger tho.

[Losiracer2]

well if you dont' wanna do that, get the ES inserts for your mounts, the front one on ebay was only $25 shipped. That took care of most of my motor rocking issues. I previously had a filled 94a torque mount and it shook like crazy, i had to get rid of it.

[19dabeast85]

well if you dont' wanna do that, get the ES inserts for your mounts, the front one on ebay was only $25 shipped. That took care of most of my motor rocking issues. I previously had a filled 94a torque mount and it shook like crazy, i had to get rid of it.

I'm using it for my rear trailing arm bushings along with ES and Prothane everywhere else. Thanks for your responses, I'll compare the two places.

[ceelooboob]

i have used the mcmaster urethane many times have filled many many mounts ...very good stuff

[19dabeast85]

i have used the mcmaster urethane many times have filled many many mounts ...very good stuff

Thanks, I think i'll go with them

[preludeman92]

The place I work for orders about $12000 a month worth of stuff from them. Next day delivery from any of their warehouses. Good customer service too. Call and talk to them and you'll find out a bunch of info about what you're about to order. You can even try to find out who makes the stuff since the site never says.

[ceelooboob]

The place I work for orders about $12000 a month worth of stuff from them. Next day delivery from any of their warehouses. Good customer service too. Call and talk to them and you'll find out a bunch of info about what you're about to order. You can even try to find out who makes the stuff since the site never says.

yea they do have great customer service...i forgot whats the name of the company on the can of urethane ...but everytime i have ever ordered from them i get my order next day....and i only pay standard shipping

[Boost_Lee]

+1 for mcmasters

[verderacer]

Thought I would ask since the thread has already started. Is it ok to fill out 4 mounts, including the front torque mount? Has there been any problems with filling them and how is engine feel and interior noise afterwards?

Has anybody tried using the 94A instead of the 80A and found any difference?

[Losiracer2]

Thought I would ask since the thread has already started. Is it ok to fill out 4 mounts, including the front torque mount? Has there been any problems with filling them and how is engine feel and interior noise afterwards?

Has anybody tried using the 94A instead of the 80A and found any difference?

yeah the 94A is the hardest urethane, so it's pretty much rock solid. When i put my 94A mount in, my hood, headliner, steering wheel and dash started to shake when below 1K rpms, so basically whenever i was at a stoplight. I have an Automatic trans, so it might be better for a manual since no load is on the engine when idling at lights.