Alright well here's the scoop.. my buddie from back home wasn't thinking that well and bought a 97 H22A on i whim cuz his motor blew so i went home on leave and tried to help him swap it.. here's where we got and i'll tell you the whole story..
So we swapped it and wired up the tranny and everything.. we swapped the Distributor for an 93 H23 distro and used the F22 fuel rail and harness.. now we didn't add any wires yet and i know you have to add some but i have no clue which wires or what.. thing is im out of state now so im trying to relay everything over the phone for him cuz he don't have internet at home so he can't come on here and ask..
Here's what is going on now.. we tried to match up wires and such but there are still like three plugs around the intake area where no plugs match up to it or better yet not enough plugs on the F22 harness..
someone i don' know who but they told him he needed to get an OBDI throttle body for the plugs but i have no idea if they know what they are talking about..
Now we did not get new injectors he used the original OBDII injectors so i don't know if that could cause a problem but i believe i read that you need to use OBDI injectors but i am not sure..
Now as of right now it will fire and run but it idles between 500 and 1500 up and down constantly so i am stumped..
I am posting because he just called me saying how much he was frustrated about people back home not helping him and he said he was close to just selling the motor and starting over again.. i pretty much said hold your horses ill post on cb7tuner and see what the masters have to say.
Thanks guys
So we swapped it and wired up the tranny and everything.. we swapped the Distributor for an 93 H23 distro and used the F22 fuel rail and harness.. now we didn't add any wires yet and i know you have to add some but i have no clue which wires or what.. thing is im out of state now so im trying to relay everything over the phone for him cuz he don't have internet at home so he can't come on here and ask..
Here's what is going on now.. we tried to match up wires and such but there are still like three plugs around the intake area where no plugs match up to it or better yet not enough plugs on the F22 harness..
someone i don' know who but they told him he needed to get an OBDI throttle body for the plugs but i have no idea if they know what they are talking about..
Now we did not get new injectors he used the original OBDII injectors so i don't know if that could cause a problem but i believe i read that you need to use OBDI injectors but i am not sure..
Now as of right now it will fire and run but it idles between 500 and 1500 up and down constantly so i am stumped..
I am posting because he just called me saying how much he was frustrated about people back home not helping him and he said he was close to just selling the motor and starting over again.. i pretty much said hold your horses ill post on cb7tuner and see what the masters have to say.
Thanks guys
Comment