H22 Swap in Progress

[ktcb7]

the one that goes from the fuel filter to the fuel rail

No, the one that goes from the filter to the tank.

[motobmx105]

hey man you live in sac? if you need any help or whatever im like 45 mins away in yuba city, ive never done a swap but i plan on doin one in mine soon so it would be cool to help and learn and shit so let me know..

[ktcb7]

hey man you live in sac? if you need any help or whatever im like 45 mins away in yuba city, ive never done a swap but i plan on doin one in mine soon so it would be cool to help and learn and shit so let me know..

Ya I stay in Sac. I plan on removing the f22 probably tomorrow and I have to change some parts on the h22 and everything should be ready to be put in on Nov.1. So whenever you want to come down its cool, just let me know. It always cool to meet new people and to learn new things.

[ktcb7]

I have the f22 all off the mounts, just needs removing. As soon as it comes out I'll be making the sub-harness and fixing my fuel line. Yesterday I picked up my new axles, clutch, t belt, and water pump. The install becomes closer and closer.

[ktcb7]

OMG, finally got the f22 out! Now I have to pick up my parts from my uncle and begin changing the t belt, water pump, and clutch. Me and a buddy took a closer look at the h22 harness and it looks to be cut. "Is it possible to reuse the f22 engine harness and just find what I need from the h22 to add on?" Throughout this coming week I need to fix my fuel line, sub-harness, clutch, t belt, and water pump. Hopefully this will all be done by next saturday.

[jas_r34]

OMG, finally got the f22 out! Now I have to pick up my parts from my uncle and begin changing the t belt, water pump, and clutch. Me and a buddy took a closer look at the h22 harness and it looks to be cut. "Is it possible to reuse the f22 engine harness and just find what I need from the h22 to add on?" Throughout this coming week I need to fix my fuel line, sub-harness, clutch, t belt, and water pump. Hopefully this will all be done by next saturday.

Just reuse your stock f22 harness, no need for the H22 one. You will need to add a few things such as vtec solenoid wires straight to the ecu.

[ktcb7]

Here's a couple of pics:

JDM H22A


Loaded up on the way the home!


Finally, this was a pain in my ass!!

[ktcb7]

Look what I found on my H22a when I was taking the harness off! Pretty it's not rare or anything, just cool to me!

[TheNextAZN]

lookin good man

The nor-Cal H-parade is growing!.. lol

[wed3k]

lookin good man

The nor-Cal H-parade is growing!.. lol

[DaGrk1]

OMG, finally got the f22 out! Now I have to pick up my parts from my uncle and begin changing the t belt, water pump, and clutch. Me and a buddy took a closer look at the h22 harness and it looks to be cut. "Is it possible to reuse the f22 engine harness and just find what I need from the h22 to add on?" Throughout this coming week I need to fix my fuel line, sub-harness, clutch, t belt, and water pump. Hopefully this will all be done by next saturday.

just use the f22 one. its isnt hard to wire it up at all.

[jdm_inspired]

What tranny did you get?

[ktcb7]

What tranny did you get?

I got the M2B4!


















J/k I just got the M2A4, standard jdm prelude tranny. Its better than my stock 5spd!

[TheNextAZN]

J/k I just got the M2A4, standard jdm prelude tranny. Its better than my stock 5spd!

Time to hunt down a LSD gear!

[ktcb7]

Finished my t belt and water pump friday before the rain, all thats left is the clutch and fuel rail. Yesterday and today I finished my wiring. A question I do have is that on my knock sensor and iab sensor there are ground wires coming from it, where do I ground then to?