H22a cruise control

[Raf99]

Did some searching and can only really find this thread:
http://www.cb7tuner.com/vbb/showthre...ghlight=cruise

This doesn't really answer my question though and I think I've confused myself now, haha

I believe that the F22 throttle body (TB) has only 1 connection for the gas pedal cable, while the H22A has two connections for two cables (TB and CC), pictured here:



Although I have a H22A which came with the TB it only has 1 connector. Am I mistaken here in that the CC cable attaches to the pedal and not the TB?

[4GAccordH22]

I used the Accord gas pedal and throttle cable. No mods required, I have cruise on my H22A1. 1 cable to the throttle body and 1 to the CC unit. Although I did change the CC control unit to a manual one instead of the original automatic one...

[Raf99]

I used the Accord gas pedal and throttle cable. No mods required, I have cruise on my H22A1. 1 cable to the throttle body and 1 to the CC unit. Although I did change the CC control unit to a manual one instead of the original automatic one...

I used the accord pedal and throttle cable too, so my question is where does the cruise control cable connect to ?

[4GAccordH22]

It goes from the gas pedal to the cruise control vacuum unit under the hood. Doesn't go anywhere near the throttle body...

[Raf99]

It goes from the gas pedal to the cruise control vacuum unit under the hood. Doesn't go anywhere near the throttle body...

Alright. I'll have to figure out where this cable goes then. It wasn't me who took it out initially. I'm assuming it runs through the firewall right beside the other cable to the pedal itself.

Thanks

[r1emperor]

Alright. I'll have to figure out where this cable goes then. It wasn't me who took it out initially. I'm assuming it runs through the firewall right beside the other cable to the pedal itself.

Thanks

You are correct!

[timmy0tool]

yep the cc cable attaches to the pedal assembly!