Announcement

Collapse
No announcement yet.

Map Sensor Problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Map Sensor Problem

    Ok i had a cel for my map sensor.
    i followed the stickys and rewired my map sensor from obd1 to obd2
    well went to start it up and it wont stay running. but theres no cel's
    i unplugged it and started it up then pluged it in. no cels and it stayed running but if i turned it off and tried starting it. it'll turn over but shuts right off and kinda back fires.
    any idea's ?????

    #2
    Originally posted by Venom8702 View Post
    Ok i had a cel for my map sensor.
    i followed the stickys and rewired my map sensor from obd1 to obd2
    well went to start it up and it wont stay running. but theres no cel's
    i unplugged it and started it up then pluged it in. no cels and it stayed running but if i turned it off and tried starting it. it'll turn over but shuts right off and kinda back fires.
    any idea's ?????
    What motor is it that you have? We need to know a little more about your car so we can help you. Some motors have a different map sensor. And it sounds like its a bad map sensor to me so it wouldn't matter if you re wired it or not.

    Comment


      #3
      my bad
      its a 92 accord lx with a 01 h22a swapped into it.
      ill try tomorrow and swap the map sensor

      Comment


        #4
        are you using the Accord sensor on the firewall or the prelude sensor on the tb?

        click to see my ride
        click to check out my bb6 dash swap

        Comment


          #5
          Originally posted by moetan View Post
          are you using the Accord sensor on the firewall or the prelude sensor on the tb?
          right now im trying to use the map sensor thats on the intake of the h22.
          i still have the old map sensor.
          whats the best route to take?

          Comment

          Working...
          X