M2b4 swap question

[Learners_Permit]

I have found a deal on a nice m2b4 tranny with all the fixings. My question is can this transmission be bolted onto my f22a1 motor or do I need to reconsider?

[youngflyndsaved]

yes, it's a direct swap. but you have to relocate the studs where the transmission mount goes. and use your Accord intermediate shaft.

[ThrakBarts]

here's how I did it. http://www.cb7tuner.com/vbb/showthread.php?t=56024

[Learners_Permit]

Thank you both for that. I was curious as to whether the clutch and pressure plate will work than?

['93CB7Ex]

stock clutch works.

[Learners_Permit]

So 1 last question the flywheel works too than correct?

[Granite CB7]

^correct, stock f/w is the same as an H22 f/w. You're going to love that setup, M2B4 really woke up my old F22A6! Go easy on the 5th gear though, no speed-shifting!

[Learners_Permit]

Thank you all for your patience and answers.

[Learners_Permit]

So I did not get the clutch, flywheel, or pressure plate with the tranny. Do I need to get h22 parts or can I use f22 parts?

[The G-Man]

F22 is fine

[Learners_Permit]

Thank you!