Announcement

Collapse
No announcement yet.

whats going on here

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    whats going on here



    rotor from back




    rotor from front





    this the hub rotor and bearing for my ROH conversion
    the problem is that the hub is not clearing the inner diameter of the rotor...
    I ordered the assembly from 1a auto (wheel hub and bearing 98 acura cl 2.3)
    the rotor is a autozone part (98 acura cl 2.3)

    so whats going on here??????????????
    Tags: None
    #2
    Huh? The back of the hub looks to be machined for hub over rotor? I wonder if those are 97 2.2 CL hor hubs. Idk weird

    Comment

      #3
      The bearing isn't screwed into anything.
      Gary A.K.A. Carter
      [sig killed by photobucket]

      Comment

        #4
        that appears to be an aftermarket hub... is it possible that it is wider diameter, and too wide to fit inside the particular aftermarket rotors you have? can you measure the widest distance across? I can compare to the OEM ROH hubs I have here. I wonder if a different combination (those rotors with OEM hubs, or those hubs with different rotors) would work.


        - 1993 Accord LX - White sedan (sold)
        - 1993 Accord EX - White sedan (wrecked)
        - 1991 Accord EX - White sedan (sold)
        - 1990 Accord EX - Grey sedan (sold)
        - 1993 Accord EX - White sedan (sold)
        - 1992 Accord EX - White coupe (sold)
        - 1993 Accord EX - Grey coupe (stolen)
        - 1993 Accord SE - Gold coupe (sold)
        Current cars:
        - 2005 Subaru Legacy GT Wagon - Daily driver
        - 2004 Chevrolet Express AWD - Camper conversion

        Comment

          #5
          I ordered the hub assembly (hub and bearing) from 1a auto.com they verified that this is the right part. one of the main sellers is for the roh conversion.

          Originally posted by cp[mike] View Post
          that appears to be an aftermarket hub... is it possible that it is wider diameter, and too wide to fit inside the particular aftermarket rotors you have? can you measure the widest distance across? I can compare to the OEM ROH hubs I have here. I wonder if a different combination (those rotors with OEM hubs, or those hubs with different rotors) would work.
          I will measure in the AM. the rotors are supposed to be for a 98 cl 2.3 and I got them from Autzone if that matters
          does anyone know if the 98 accord rotors would have the same issue?

          Originally posted by The G-Man View Post
          The bearing isn't screwed into anything.
          look at the pic closely

          Originally posted by cp[mike] View Post
          that appears to be an aftermarket hub... is it possible that it is wider diameter, and too wide to fit inside the particular aftermarket rotors you have? can you measure the widest distance across? I can compare to the OEM ROH hubs I have here. I wonder if a different combination (those rotors with OEM hubs, or those hubs with different rotors) would work.
          The inner diameter of the backside of the rotor is 5 1\2" what's urs?
          Last edited by Jarrett; 05-13-2015, 11:58 AM.

          Comment

            #6
            Sounds silly but from the pics the issue appears to be that the lugs are too big for the holes.
            My System
            http://www.cb7tuner.com/vbb/showthread.php?t=165155

            Comment

            Previous template Next
            Working...
            X