Black Boxes - disable the BRAKE lamp failure indicator?

[doylna]

permanently bypass the BRAKE failure indicator?

veddy simple eh.

it all starts at the brown box in the driver side outer tail light..

cut the white/green wire (or just remove the pin) that went to the brown box, and connect it to Ground(-). you can tap into the other solid black wires that go along with the tail light wiring on that side.

voila!

So doing this will allow the 3rd brake light to still light up, but the indicator light on the dash won't light?

[cp[mike]]

So doing this will allow the 3rd brake light to still light up, but the indicator light on the dash won't light?

correct.