How to fix these cel codes

[dan21]

Hey guys I jus bought my 3rd cb7 and I'm getting cel codes 4,6,and 15 it takes a few cranks to start also. I know it could be a few things but any help will do thanks

[NorcoAccord]

I just took a quick look at what the codes are and they make me point to the dizzy. If you have a spare one swap it out and see if that helps. Also if I am wrong someone will correct me.
4 CKP - crank position sensor
6 ECT - water temperature sensor
15 Ignition output signal

[dan21]

That's what I was thinkin I'll find someone wit a spare anyway thanks for the help

[NorcoAccord]

After double check I think you will still have cel 6 ECT - water temperature sensor. I think that sensor is right next to the motor, it should be green if i remember right.

[dan21]

It is green but wit that code should I just get a new one

[NorcoAccord]

It is green but wit that code should I just get a new one

I would just go to the junk yard and take one, but only after I check the dizzy.

[ExplodingCake]

http://www.cb7tuner.com/vbb/showthread.php?t=116369

[jova1993cb]

well what would it mean if the cel doesn't flash codes but stays illuminated when checking for cels?

[NorcoAccord]

well what would it mean if the cel doesn't flash codes but stays illuminated when checking for cels?

I think that means your ECU is dead.

[PIMPCORD]

I think that means your ECU is dead.

Affirmative.

[92turboaccord]

i think i have the water temp senser pm me your info and ill send it to you