h23a1 getting no spark please help!!!!

[weldingtodd88]

ok so i got my h23 accord back from blue91accord and it still has no spark, its not the fuses, its not the main relay, the first stock h23 dizzy didnt work so he put on a h22 internal dizzy on it and low and behold it also didnt work, its getting fuel, its just not hetting any spark. so all together i have 2 dizzys 1 internal and one external i have 2 msd coils, 2 stock external coils and 3 or 4 dizzy caps, everything im trying is not working i dont think its the ecu, im losing my mind here any help would be greatly greatly appreciated

[HondaFan81]

Get a wiring diagram for the ignition system and diagnose. Start at the ignition key cylinder, make sure the ignition switch is actually working first. Then, go from there out to ECU and ignition coil. Make sure you are even getting power to the ignition coil, then from that point out to the plugs.

Based on what you have said, you're dealing with the latter part of the system.

[weldingtodd88]

thanks man ill keep you posted, if anyone else has any suggestions please feel free

[f22a1accord]

thanks man ill keep you posted, if anyone else has any suggestions please feel free

lol i just posted on the other thread my bad. you might wanna try that though when u read it.

[weldingtodd88]

im tryna fix it now, but if anyone wants it pm me and we'll work something out, i need somethin that runs now

[weldingtodd88]

i think i just need to get a stock h23 dizzy cuz there is spark goin to the dizzy i found out, just not gettin to the plugs

[mrhonda]

Is the distributor rotor spinning?

[CBAccordA4]

Get a new distributor, no junkyard crap either. Im sure you checked cap & rotor already so assuming those are good, power is just not getting there after electrcity is sent to the dizzy. If the external coil isn't burned out then some circuitry in the dizzy is.

[nusdogg]

Check your Ground Wire on your Intake Manifold if it has one, if not then check all your ground connection inside your bay. If its not tighten all the way down, then it will not create spark like mine when i left it a tad loose.

One time i forgot to tighten my Ground Wire on my Intake Manifold and my damn Dizzy wouldn't create spark.. 3 days later, found out the ground wire was loose by a tad bit.