I just got my DDM tuning 35 watt slim ballast. kit I tried installing it and it wouldnt work, I tried different several connections and still no luck. I have the relay that powers it straight from the battery. If anyone can help or give a diagram of what way you plugged this in it would be extremely helpful. Thanks.
Announcement
Collapse
No announcement yet.
Hid Help
Collapse
X
-
I took some pictures. I have the wiring harness that has two connections. Then I have the connection where the stock bulb was. And 3 more connections on the kit. One of the connections come out where the bulb is. Heres the pics.
http://www.flickr.com/photos/39534974@N03/
Comment
-
My question is what do these three connections go to? One goes where the stock bulb was and 2 go to the wiring harness. Im just confused on which ones. http://www.flickr.com/photos/39534974@N03/4009548541/
and the two harness connections
http://www.flickr.com/photos/39534974@N03/4009398893/
Comment
-
hid kit confuses me lol
usually ballasts have two wires coming out, one goes to bulb, and the other going to the stock harness.
The wiring going to your bulbs seems to split off into 3 other connections-- bulb, and two mystery ones.
Only thing i can think of is both of those extra connections plug into the other ballast.
or you possibly have bi xenon kit o.o
here's a good install
http://www.sharphid.com/installation...olvo%20S40.pdfLast edited by ikayto; 10-13-2009, 11:17 PM.
Comment
-
I had to do the same thing, the company had the (+) and (-) connections reversed on mine. Pull back the wiring conduit on the stock wiring harness and make sure the connections are correct.Originally posted by C91BLX7I had to reverse the polarity for mine to work.Originally posted by 92dmI was actually just being a smart ass, and not really contributing to this at all.VOUCHES
Bought from: cb95spd
Comment



Comment