I have a 1500w rockford mono amp and a 600w rockford 4 channel amp, is there a general reccomended hertz rating that I should adjust my amps to so that it won't damage anything or does it all depend on how I want it to sound and the hz rating won't matter?
-
-
For bass, I usually set my crossover at 80hz as the cutoff. That way nothing higher than 120hz goes thru my subs
My bad. I meant 80 as well. I had 2 different things goin on at the same timeLast edited by nine_deuce; 12-09-2009, 11:36 PM. -
So is it the higher the number on the herts the higher the pitch of the sound?Comment
-
Yes, higher hertz = higher frequencies. I believe my subs amp is set at 80 hz. anything above that sounds too midrange for me.
This is also not in the correct section. It should be in audio.Comment
Comment