no spark

[thepowderblue]

My car started to die when I stop. Then it got so bad I cant even start my car because theres NO SPARK, Its a 91SE. I put my dizzy on my dads 91lx and his car ran fine with it.All of the fuses are good. I swapped my ecu and it still wont start. ( I put a ecu out of a M/T accord could that cause it not to start?) I sill wont start with the stock pt6 anyway. I put new plugs and wires on.
I was thinking it MIGHT be the contacts in the ignition.

[thepowderblue]

I changed the ignition and it still wont start

[rockredtail]

I know your problem is frustrating but do really think that starting a different thread every day or two on the same topic is gonna really help??? Not to be a dick but I think this is the 3rd or 4th thread of yours I have seen on the same topic. All people are gonna do is guess and tell you to change parts which is what happened in your other threads and now it seems you've changed most everything maybe it's time you have a mechanic look at it as with all the money you've spent on parts just guessing you probably could've gotten the problem resolved at a shop already.

[stretch JDM]

IMO, it sounds as if the main relay has went bad .

[F20A CB7]

Ok no spark, just double check to make sure ur plugs r not archin, and make sure u ur cap terminals r ok.

Once I cleared that move to the next step.

Check ur icm, u said u replaced it and nothing..

Check main relay
Ecu fuse-by ur foot

The biggest thing ppl look over and I did so myself cuz I had no spark for a week, and drove me bonkers, is the GRounD Under the Thermo Housing, remove it, 10mm, and sand the area lightly.

Check for spark. Acutally do the ground wire first man b4 u go all crazy.

[thepowderblue]

I put another dizzy and wires on and that didni fix it, I will go clean that ground. I thot that may be it so I put a gire on the engine and another on the battery. I will clean it anyway and let you know how to go's

[thepowderblue]

am pulling a coad 15. Ignition out put signal
I cleaned the ground.

[foamypirate]

Your car won't start because you had a threesome and a dog licked yer' dick.

[thepowderblue]

He DIDNT lick it. He was thinking about it and sniffing it because it smelled like pussy...I PUSHED HIM AWAY BEFORE HE GOT THE CHANCE TO
So I have spark but its super weak and like I said code 15

[F20A CB7]

Ignition output signal, wats that

Edit, that's not the icm is it?

[thepowderblue]

Problem:
-- Check Engine Light code 15 (ignition output signal)
-- No Spark, engine does not turn over.It gos chug chug chug but no sign that it wants to start,

Replaced the following:
-- distributor
-- rotor
-- ignition coil
-- distributor cap
-- ecu
-- ground wire
-- battery
-- spark plugs

The code on the ECU will not reset, I checked the fuses and they all
appear fine, in side and under the hood.
Need your help... I'm at a loss. otherwise I'm going to start stripping
it down and selling the parts to whoever needs them (seeing how I have
a lot of new ones on there).

Thanks

[4CYLPOWER92]

Check the resister. It's that metal rectangular thing with fins on the right side near the shock tower when you are looking under the hood.

[F20A CB7]

And u said u replaced the icm inside the dizzy rite. B patient u will get this fixed.

[I<3MyHonda]

I don't think the resister would matter, it's for the injectors. I'd say check out your main relay bro. That would be my best guess seeing as you've checked everything else. It could be a wiring issue as well.

[YK86]

Code 15 is the icm which is the ignitor. It's the thing I posted a pic of in your other thread. But you said you already changed it and it was fine........

Also if you tried it in your dad's car and it was fine, then maybe the distributor connector/wiring on your engine harness side is frayed or something.