1991 EX Accord
OK, mind is boggling me on this one and im just getting frustrated. Ill start from the beginning just so you guys know what I did.
OK, so I had the type of clutch pedal that would sometime stick to the floor during power shifting to second gear with no loss of fluid, few months later, fluid would actual leak out into pedal area, meaning master cylinder is no good. I bought a brand new one from from ebay, an exedy built unit along with the slave. Changed it out and then clutch fluid starting spitting out of one of the lines around the tranny area leading to the slave. Changed that out with a used unit, no more leak from there. Now there is a leak coming from the clutch line fitting going into the clutch master cylinder.
What in the hell would cause this?? Its exedy built so it should be be on point as far as spec, it was not leaking there with the oem master cylinder in by the way. Do you think I should get another line or should I get a OEM Honda master cylinder?? Also do you think locktite might work on it???
OK, mind is boggling me on this one and im just getting frustrated. Ill start from the beginning just so you guys know what I did.
OK, so I had the type of clutch pedal that would sometime stick to the floor during power shifting to second gear with no loss of fluid, few months later, fluid would actual leak out into pedal area, meaning master cylinder is no good. I bought a brand new one from from ebay, an exedy built unit along with the slave. Changed it out and then clutch fluid starting spitting out of one of the lines around the tranny area leading to the slave. Changed that out with a used unit, no more leak from there. Now there is a leak coming from the clutch line fitting going into the clutch master cylinder.
What in the hell would cause this?? Its exedy built so it should be be on point as far as spec, it was not leaking there with the oem master cylinder in by the way. Do you think I should get another line or should I get a OEM Honda master cylinder?? Also do you think locktite might work on it???
Comment