changing out rear wheel hub... im stuck now

[FGR]

so i easily was able to remove the wheel hub and get it apart with no hassle now putting the new on is proving to be a challenge this is my first time doing this so if someone could guide me through this hickup i would greatly appreciate it i also am attaching pictures. btw its a 93 ex

this is the new one with how far it will go on

the old one


do i need to hammer it on or what???

[FGR]

anybody?

[accordztech]

Is the old one and new one physically the same? If so you need to clean off that old rust somehow. Maybe hit it with wd40.

Its a tight fit and thats possibly whats holding it back. Use some lubricant when you put it on as wellm

[FGR]

yea i got it on. i cleaned most of the rust of and took a piece of wood and a hammer and gave it some help sliding on. thank god for hammers. i also hit it with some crc silicone spray

[accordztech]

Im glad you got it taken care of! Sometimes its something so simple.

[Accord problems]

i hope you did not cock it well putting it on as this can destroy or cause premature ware on the bearing . i have done that to mine twice in one day .

[FGR]

accordztech yea i know i was jsut worried it was the wrong on

Accord problems thats what i was worried about but i tapped it on not beat it like i wanted too. also the part was cheap and when i do my suspension im most likely going to convert it to a 5 lug or just redo all the hubs.

anyways thank you guys!

[illinois_erik]

when you torque the rear spindle nut to spec itll pull everything in tight where it needs to be. 134 ft-lbs

of course after cleaning the spindle of corrosion and shit..

[FGR]

it was still a pain to put on. i watched like 3 videos and they just threw it on like it was cool. and im over here having to pound it on. oh well it rides smooth no sound. its good!