A proper conversion shouldn't be any less effective or reliable than the original R12 system. If it doesn't work well, it was either done incorrectly, or poor quality components were used.
Ideally, the compressor, condenser, and every AC line should be replaced with brand new parts, and the parts should be absolutely clean. Anything less would result in contamination, and therefore poor performance and eventual failure. There's a reason why a proper conversion costs so much.
Ideally, the compressor, condenser, and every AC line should be replaced with brand new parts, and the parts should be absolutely clean. Anything less would result in contamination, and therefore poor performance and eventual failure. There's a reason why a proper conversion costs so much.
Comment