Accelaration

[empera]

What do u guys think will help my accelaration? If anything.
I was lookin at these on ebay, claimed 50% betta accelaration than performance, tell me wat u think or if u've tried this.

[akkordlayinkit]

Heres a thread on it....
http://www.cb7tuner.com/vbb/showthre...throttle+rotor
but 50%

Jay

[cokinut]

i tried it on my car and the throttle response made my car feel like a different car. I only had to mash on the throttle about 1/2 to 3/4 of the way down to get the same effect as flooring the car. I loved it. But i sold it because it was messing up my tranny cable synchronizing with the throttle on my automatic. It didn't damage anything.

[empera]

hmm ok so it does make a diff. i do wanna try it out but after seein wat cokinut said i dun think i should.
i'll try tighten the cable a bit hopefully nuthin goes wrong hehe

[Kabuki]

Originally posted by empera
hmm ok so it does make a diff. i do wanna try it out but after seein wat cokinut said i dun think i should.
i'll try tighten the cable a bit hopefully nuthin goes wrong hehe

Yeah, It's not anything that will really DO anything for the power of the engine. It just changes the level of acceleration that corresponds to the pedal pressure.

[91accord4door]

just be careful if you over tighten it,your gas pedal will stick.

[theone]

ive had mines for a year now, and it works perfect. i just took mines off last week (to fix my throttle body) and drove it without it for a while...i didnt like it so i put my it back on. pedal is more firm.

but yeah they work, i really dont have to gas my car for it to go.........

put one on my couzins cb7 and she loves it, she was like i was on the hihgway and i gased it and next thing i kno i was at 100mph

[90Accord-R]

So, it just opens the throttle faster? I don't think I'll be buying one, my size 13 gets the pedal to the floor quickly enough....

[fliplyricist1]

anyone have a digi cam and take a picture of exactly what needs to be loosened/tightened in order to do this free mod? thx

[Maple50175]

Hey man i think this is it.. whats circles.. Thanks for the gauges man inpresse with shippin

[empera]

ok i think it made a diff. not too much but yea, i pulled it like 1 or .5 inches to the right. is that the rightway to go?
i might try that billet rotor, i just want my car to have betta throttle response, but with no consiquenses.

[91accord4door]

maple bro,gotta clean up that engine.no affence but its durty,durty.

[NutBucket]

Originally posted by 91accord4door
maple bro,gotta clean up that engine.no affence but its durty,durty.

It'll take more then Simple Green to take care of rust like that.

[ChIoVnIdCa]

Its more to the left

[empera]

hmm u sure? this is wat i did moved the cable to the right...


i would think thats correct...so there will be no slack unless i pull the throttle