I Need Help Asap!!

[sickocb7]

ok heres the deal...i just installed my delta 272, i cant get the fuckin thing to stay running. I tried everything....adjusting the idle screw, messing with the IACV, FITV, blocking off the boost valve, and still cant get it to idle......im looking at a chipped p06, but right now im in need of some help

also does anyone have a basemap for an f22a1 with i/h/e/272 cam!!!
any help would be great!

[HF22T]

is it starting and stalling or what more info
did you time it correctly and do you have adjustable cam gears

[sickocb7]

when i start it it runs alittle rough for about 2-5min then it stalls out, i restart the car and it idles for 30sec-1min the stalls and so on and so on....the timing is dead on, and the cam gear is stock

[HF22T]

2 big problems timing dead on with a 272 and a stock gear

also your map could use a lil tweaking but until then the adjustable woudl help alot

do you have a manual fpr ?

[sickocb7]

i dont have a chipped ecu not do i have afpr....i tried advancing and retarding the timing a couple degrees....from what i read on hondafans setup you dont need an adjustable cam gear....its really hard to do anything when the car wont stay idling

[sickocb7]

i was also wondering if completely blocking off the IACV would work as well???

[HF22T]

your gonna need more fuel thats teh thing due to the valve duration its not getting enough fuel and its chokeing out
hondafan rofl love you cisco lol