Engine mounts, Urethane front mount

[i-07]

Correction, I have Prothane suspension bushings all around but not any inserts. The McMaster's setup is super cheap/effective and lasts for a very long time. So, I suggested McMaster, not Prothane for the mounts!

ooh!! my bad.

[i-07]

hey were can i get one?????? autozone don't have one or the guy was just stuped.

[heylookitsdylan]

Oreilly Autoparts sells the front mount inserts....

Now if only i could find a rear....

[i-07]

Oreilly Autoparts sells the front mount inserts....

Now if only i could find a rear....

www.nopi.com

but there is no oreillys near me.

[Losiracer2]

Autozone should have them. But they charge like 69.99, so that hurts. I got my poly'd one off of celooboob for cheap like 30 bucks...shipped. so try contacting him. He's a professional at doing that, the mount he sent me looked perfect.

[prNonVtec4u]

you might wanna take a look at your rear motor mount...

your complaint really seems to match with those that have been taken care of by changing the rear motor mount instead of JUST the front one...

i know it takes a bit of time, but to REALLY check your rear, you're gonna HAVE to take it out and see it cause there's no way to peek at it and automatically tell it's condition... trust me

[Losiracer2]

you might wanna take a look at your rear motor mount...

your complaint really seems to match with those that have been taken care of by changing the rear motor mount instead of JUST the front one...

i know it takes a bit of time, but to REALLY check your rear, you're gonna HAVE to take it out and see it cause there's no way to peek at it and automatically tell it's condition... trust me

well it got a little better after the front one was replaced with that solid one, but now everything shakes, oh well i'll deal w/it. I've got an EX, doesn't that rear one cost $$$...like 200 or so?

[90Cb7sleeper]

well it got a little better after the front one was replaced with that solid one, but now everything shakes, oh well i'll deal w/it. I've got an EX, doesn't that rear one cost $$$...like 200 or so?

from what ive experienced, all rear auto mounts are the same, whether it be a dx,lx or ex... its the manual rear mounts that differ.

[Losiracer2]

from what ive experienced, all rear auto mounts are the same, whether it be a dx,lx or ex... its the manual rear mounts that differ.

yeah i have the hydrolic one w/ a vac line

[prNonVtec4u]

yeah i have the hydrolic one w/ a vac line

which are known for completely ripping apart to shit... ...

[Losiracer2]

which are known for completely ripping apart to shit... ...

so to fix this you would just get an LX/DX one and plug the vac. line? is it as simple as that?

[blakmetal.honda]

someone told me you can run without a front engine mount, just using the rear, passenger side and driver side mounts. is that right?

[i-07]

i found a prothane kit for $23 on nopi.com

[starchland]

someone told me you can run without a front engine mount, just using the rear, passenger side and driver side mounts. is that right?

sure you can do that but Honda designed the car a way for a reason. not for some doofus to come along and just take it off and think everything will be dandy without reinforcing anything else

[prNonVtec4u]

so to fix this you would just get an LX/DX one and plug the vac. line? is it as simple as that?

use any, preferrably non-vacuum controlled, but any good/new motor mount will do...

most ppl look into swappin to the one from the 5speed DX/LX motor mount cause it's the round kind not the tower kind and it's much easier to fill