ENG: Wire tuck

[stunin92_accord]

I never movved my fuse box, I kept it at factory location, but from waht I hear is you dont have to move the ecu.

hmmm,oh ok.thanks

[SPLCB7]

I had to move my heater....not my ecu....if that helps any

[stunin92_accord]

okay so the harness that goes into the firewall- does it unplug somewhere so that i can run it under the wiper motor? because everybody says you dont have to cut any wires, and that you just have to unwrap the wire loom??



and this engine harness is going under the brake booster after i get the other harness tucked??

> hey ddcb7,do u have a finish photo of your wire tuck on the driver side.i need to see how did u tuck the three big plugs.(the wire that connects to the injector resistors).thanks

[iwork4mycb7]

yo reese you going to have to do a wire tuck on that caliper, im intrested...

[Darkcloud]

yo reese you going to have to do a wire tuck on that caliper, im intrested...

LOL it was a joke, I was doing a test fit on the wheels without the caliper

[iwork4mycb7]

LOL it was a joke, I was doing a test fit on the wheels without the caliper

Ahhhh really? i was so looking forward to tuck them in somewhere and not have breaks.. lol

[Flyingsheep]

Anybody who keeps their P/S, anywhere you can hide the overfill tank? I'm thinking about doing some of this while my motor is out.

[Darkcloud]

Better off making a custom overflow or converting the rack to manual

[Flyingsheep]

I rather keep my power steering lol. I might have an idea where I could put it. Any idea why the P/S hoses are routed to go in where the A/C condenser and come back?

Pic of my bay currently

[TracieS]

Ok guys after my tuck I have a problem with my blinkers when I cut them on it makes a humming buzzing sound. I also swapped to a black 93 ex dash to.

http://www.youtube.com/watch?v=t8nzP...tz1xYdG6Kytovu

[turbo90accord]

Your probably missing a ground somewhere. 99% of the time thats the problem.

[Darkcloud]

Or the switch is bad

[TracieS]

checked all grounds and all them are good and it worked fine before I took it apart. But ill grab another switch and see.

[xkjnboix]

i has a da9 with that hazzard buzz issue and it was a ground issue. i added 4 more grounds to the chassis and upgraded all the wires to 4 gauge and it solved the problem.

[cuate01221]

Ok guys after my tuck I have a problem with my blinkers when I cut them on it makes a humming buzzing sound. I also swapped to a black 93 ex dash to.

http://www.youtube.com/watch?v=t8nzP...tz1xYdG6Kytovu

There is a box that should be grounded. It usually goes near the shock tower on the passenger side. If it's not grounded that will happen. I found out the hard way.......