So I either have a half tank of fuel or the float is sticking at the half tank mark, since testing the needle made it move and the light work. I've driven 90 miles since putting 20 bucks on and the needle hasn't gone down.
Announcement
Collapse
No announcement yet.
ENG: How to test Low Fuel Light bulb
Collapse
X
-
I replaced my fuel gauge from a matching NS cluster. Once I installed it, the needle immediately went past full and has stayed there for 2 weeks.
I just replaced my sending unit today, and even unplugging the connector, the needle does not move. I tested the fuel light and it works, but the needle won't move at all.
The sending unit I replaced was working properly in the running car I took it from.
Is this fuel gauge I have no good, or wht could be causing this? I tried to jump the SU connector to try and get the gauge to move with the B pin and ground and nothing happens.
I'm annoyed. I've replaced the gauge and the SU, what can possibly be left to repair my non working gauge? I've been driving since my last post in this thread (March) with no fuel gauge.
Comment
Comment