Photo request: Empty engine bays (no motor)

[aleks77]

Hey guys, like the title says, need some good pictures (high ress preffered) of EMPTY engine bays, either without a motor, or with everything removed, i need to know which holes i can weld up for my wire tuck/shave. Thanks a lot in advance!

[quickangel93]

cpmike, j-speccb4, and ronald have pics somewhere on this forum. and hi res to.

[excalibur02]

here are my pics.

[IMG]http://www.****.com/mauri/painted%20bay.JPG[/IMG]

[IMG]http://www.****.com/mauri/my_parts/bay001.JPG[/IMG]

[IMG]http://www.****.com/mauri/my_parts/bay002.JPG[/IMG]

:edit: removed hi res pics...

maury

[excalibur02]

for more pics look for cpmike and pat aka acclude91

[aleks77]

in the pic below, in the top right corner, on the firewall, just below the orange masking plastic, there is a bracket with 2 holes in it, what is this for? i have a base auto, and this wasnt used in my car....now im converting to 5spd, is this for a 5spd car? cause if its not, i wanna cut it off and shave it. Thanks in advance.

[img]http://www.****.com/mauri/my_parts/bay002.JPG[/img]

[accordaffair]

For the clutch master cylinder

[JohnD1079]

[avendi]

Do you mean the bracket that I circled in red:


If so, then that is the bracket that holds the clutch reservoir.
The hole in the fire wall down and to the right of it is where the master cylinder goes.

[aleks77]

yes thats what i meant, thank you i welded up pretty much every hole in the engine bay lol besides the obvious ones. Gonna run the wiring outside in the wheel well. Thanks for the help guys!

[accordaffair]

Oh, that one, that is for the bracket that holds the clutch master cylinder resevoir